69 lines
2.3 KiB
Markdown
69 lines
2.3 KiB
Markdown
---
|
|
title: Home-Assistant
|
|
---
|
|
|
|
<span class="badge badge--secondary">Support level: Community</span>
|
|
|
|
## What is Home-Assistant
|
|
|
|
From https://www.home-assistant.io/
|
|
|
|
:::note
|
|
Open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server.
|
|
:::
|
|
|
|
:::warning
|
|
You might run into CSRF errors, this is caused by a technology Home-assistant uses and not authentik, see [this GitHub issue](https://github.com/goauthentik/authentik/issues/884#issuecomment-851542477).
|
|
:::
|
|
|
|
## Preparation
|
|
|
|
The following placeholders will be used:
|
|
|
|
- `hass.company` is the FQDN of the Home-Assistant install.
|
|
- `authentik.company` is the FQDN of the authentik install.
|
|
|
|
## Home-Assistant
|
|
|
|
This guide requires https://github.com/BeryJu/hass-auth-header, which can be installed as described in the Readme.
|
|
|
|
Afterwards, make sure the `trusted_proxies` setting contains the IP(s) of the Host(s) authentik is running on.
|
|
|
|
Use this configuration to match on the user's authentik username.
|
|
|
|
```yaml
|
|
auth_header:
|
|
username_header: X-authentik-username
|
|
```
|
|
|
|
If this is not the case, you can simply add an additional header for your user, which contains the Home-Assistant Name and authenticate based on that.
|
|
|
|
For example add this to your user's properties and set the Header to `X-ak-hass-user`.
|
|
|
|
```yaml
|
|
additionalHeaders:
|
|
X-ak-hass-user: some other name
|
|
```
|
|
|
|
## authentik
|
|
|
|
Create a Proxy Provider with the following values
|
|
|
|
- Internal host
|
|
|
|
If Home-Assistant is running in docker, and you're deploying the authentik proxy on the same host, set the value to `http://homeassistant:8123`, where Home-Assistant is the name of your container.
|
|
|
|
If Home-Assistant is running on a different server than where you are deploying the authentik proxy, set the value to `http://hass.company:8123`.
|
|
|
|
- External host
|
|
|
|
Set this to the external URL you will be accessing Home-Assistant from.
|
|
|
|
Create an application in authentik and select the provider you've created above.
|
|
|
|
## Deployment
|
|
|
|
Create an outpost deployment for the provider you've created above, as described [here](../../../docs/outposts/). Deploy this Outpost either on the same host or a different host that can access Home-Assistant.
|
|
|
|
The outpost will connect to authentik and configure itself.
|