{"timestamp": "2022-04-18T08:08:26.056178", "type": "Snapshot", "uuid": "cc9927a9-55ad-4937-b36b-7185147d9fa9", "sid": "VL0L5", "software": "Workbench", "version": "2022.03.3-alpha", "schema_api": "1.0.0", "data": {"lshw": {"id": "workbench-live", "class": "system", "claimed": true, "handle": "DMI:0100", "description": "Computer", "product": "Standard PC (i440FX + PIIX, 1996)", "vendor": "QEMU", "version": "pc-i440fx-5.2", "width": 64, "configuration": {"boot": "normal"}, "capabilities": {"smbios-2.8": "SMBIOS version 2.8", "dmi-2.8": "DMI version 2.8", "vsyscall32": "32-bit processes"}, "children": [{"id": "core", "class": "bus", "claimed": true, "description": "Motherboard", "physid": "0", "children": [{"id": "firmware", "class": "memory", "claimed": true, "description": "BIOS", "vendor": "SeaBIOS", "physid": "0", "version": "?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31", "date": "04/01/2014", "units": "bytes", "size": 98304}, {"id": "cpu", "class": "processor", "claimed": true, "handle": "DMI:0400", "description": "CPU", "product": "QEMU Virtual CPU version 2.5+", "vendor": "Advanced Micro Devices [AMD]", "physid": "400", "businfo": "cpu@0", "version": "6.6.3", "slot": "CPU 0", "units": "Hz", "size": 2000000000, "capacity": 2000000000, "width": 64, "configuration": {"cores": "1", "enabledcores": "1", "microcode": "16777317", "threads": "1"}, "capabilities": {"fpu": "mathematical co-processor", "fpu_exception": "FPU exceptions reporting", "wp": true, "de": "debugging extensions", "pse": "page size extensions", "tsc": "time stamp counter", "msr": "model-specific registers", "pae": "4GB+ memory addressing (Physical Address Extension)", "mce": "machine check exceptions", "cx8": "compare and exchange 8-byte", "apic": "on-chip advanced programmable interrupt controller (APIC)", "sep": "fast system calls", "mtrr": "memory type range registers", "pge": "page global enable", "mca": "machine check architecture", "cmov": "conditional move instruction", "pat": "page attribute table", "pse36": "36-bit page size extensions", "clflush": true, "mmx": "multimedia extensions (MMX)", "fxsr": "fast floating point save/restore", "sse": "streaming SIMD extensions (SSE)", "sse2": "streaming SIMD extensions (SSE2)", "syscall": "fast system calls", "nx": "no-execute bit (NX)", "x86-64": "64bits extensions (x86-64)", "nopl": true, "cpuid": true, "pni": true, "cx16": true, "hypervisor": true, "lahf_lm": true, "svm": true, "3dnowprefetch": true, "vmmcall": true}}, {"id": "memory", "class": "memory", "claimed": true, "handle": "DMI:1000", "description": "System Memory", "physid": "1000", "units": "bytes", "size": 1073741824, "capacity": 1073741824, "configuration": {"errordetection": "multi-bit-ecc"}, "capabilities": {"ecc": "Multi-bit error-correcting code (ECC)"}, "children": [{"id": "bank", "class": "memory", "claimed": true, "handle": "DMI:1100", "description": "DIMM RAM", "vendor": "QEMU", "physid": "0", "slot": "DIMM 0", "units": "bytes", "size": 1073741824}]}, {"id": "pci", "class": "bridge", "claimed": true, "handle": "PCIBUS:0000:00", "description": "Host bridge", "product": "440FX - 82441FX PMC [Natoma]", "vendor": "Intel Corporation", "physid": "100", "businfo": "pci@0000:00:00.0", "version": "02", "width": 32, "clock": 33000000, "children": [{"id": "isa", "class": "bridge", "claimed": true, "handle": "PCI:0000:00:01.0", "description": "ISA bridge", "product": "82371SB PIIX3 ISA [Natoma/Triton II]", "vendor": "Intel Corporation", "physid": "1", "businfo": "pci@0000:00:01.0", "version": "00", "width": 32, "clock": 33000000, "configuration": {"latency": "0"}, "capabilities": {"isa": true}, "children": [{"id": "pnp00:00", "class": "input", "claimed": true, "product": "PnP device PNP0303", "physid": "0", "configuration": {"driver": "i8042 kbd"}, "capabilities": {"pnp": true}}, {"id": "pnp00:01", "class": "input", "claimed": true, "product": "PnP device PNP0f13", "physid": "1", "configuration": {"driver": "i8042 aux"}, "capabilities": {"pnp": true}}, {"id": "pnp00:02", "class": "storage", "claimed": true, "product": "PnP device PNP0700", "physid": "2", "capabilities": {"pnp": true}}, {"id": "pnp00:03", "class": "printer", "claimed": true, "product": "PnP device PNP0400", "physid": "3", "configuration": {"driver": "parport_pc"}, "capabilities": {"pnp": true}}, {"id": "pnp00:04", "class": "communication", "claimed": true, "product": "PnP device PNP0501", "physid": "4", "configuration": {"driver": "serial"}, "capabilities": {"pnp": true}}, {"id": "pnp00:05", "class": "system", "claimed": true, "product": "PnP device PNP0b00", "physid": "5", "configuration": {"driver": "rtc_cmos"}, "capabilities": {"pnp": true}}]}, {"id": "ide", "class": "storage", "claimed": true, "handle": "PCI:0000:00:01.1", "description": "IDE interface", "product": "82371SB PIIX3 IDE [Natoma/Triton II]", "vendor": "Intel Corporation", "physid": "1.1", "businfo": "pci@0000:00:01.1", "logicalname": ["scsi0", "scsi1"], "version": "00", "width": 32, "clock": 33000000, "configuration": {"driver": "ata_piix", "latency": "0"}, "capabilities": {"ide": true, "isa_compat_mode": "ISA compatibility mode", "bus_master": "bus mastering", "emulated": "Emulated device"}, "children": [{"id": "disk", "class": "disk", "claimed": true, "handle": "SCSI:00:00:00:00", "description": "ATA Disk", "product": "QEMU HARDDISK", "physid": "0", "businfo": "scsi@0:0.0.0", "logicalname": "/dev/sda", "dev": "8:0", "version": "2.5+", "serial": "QM00001", "units": "bytes", "size": 42949673472, "configuration": {"ansiversion": "5", "logicalsectorsize": "512", "sectorsize": "512", "signature": "c338ebd4"}, "capabilities": {"partitioned": "Partitioned disk", "partitioned:dos": "MS-DOS partition table"}, "children": [{"id": "volume:0", "class": "volume", "claimed": true, "description": "EXT4 volume", "vendor": "Linux", "physid": "1", "businfo": "scsi@0:0.0.0,1", "logicalname": "/dev/sda1", "dev": "8:1", "version": "1.0", "serial": "666140b3-42b9-4940-8d82-7d894261231f", "size": 4293918720, "capacity": 4293918720, "configuration": {"created": "2020-09-18 18:01:52", "filesystem": "ext4", "lastmountpoint": "/", "modified": "2022-04-18 08:06:53", "mounted": "2022-04-18 08:06:53", "state": "clean"}, "capabilities": {"primary": "Primary partition", "bootable": "Bootable partition (active)", "journaled": true, "extended_attributes": "Extended Attributes", "large_files": "4GB+ files", "huge_files": "16TB+ files", "dir_nlink": "directories with 65000+ subdirs", "64bit": "64bit filesystem", "extents": "extent-based allocation", "ext4": true, "ext2": "EXT2/EXT3", "initialized": "initialized volume"}}, {"id": "volume:1", "class": "volume", "claimed": true, "description": "Extended partition", "physid": "2", "businfo": "scsi@0:0.0.0,2", "logicalname": "/dev/sda2", "dev": "8:2", "size": 38652609536, "capacity": 38652609536, "capabilities": {"primary": "Primary partition", "extended": "Extended partition", "partitioned": "Partitioned disk", "partitioned:extended": "Extended partition"}, "children": [{"id": "logicalvolume:0", "class": "volume", "claimed": true, "description": "Linux swap volume", "physid": "5", "logicalname": "/dev/sda5", "dev": "8:5", "version": "1", "serial": "5149082d-e5ab-4ccb-b75d-52a8b4da4fc8", "size": 4292870144, "capacity": 4292870144, "configuration": {"filesystem": "swap", "pagesize": "4096"}, "capabilities": {"nofs": "No filesystem", "swap": "Linux swap", "initialized": "initialized volume"}}, {"id": "logicalvolume:1", "class": "volume", "claimed": true, "description": "EXT4 volume", "vendor": "Linux", "physid": "6", "logicalname": "/dev/sda6", "dev": "8:6", "version": "1.0", "serial": "cc4fd343-e6f4-4376-937e-f5d2fbcb48c7", "size": 34358689792, "capacity": 34358689792, "configuration": {"created": "2022-04-01 09:25:42", "filesystem": "ext4", "lastmountpoint": "/", "modified": "2022-04-18 08:06:56", "mounted": "2022-04-18 08:06:56", "state": "clean"}, "capabilities": {"journaled": true, "extended_attributes": "Extended Attributes", "large_files": "4GB+ files", "huge_files": "16TB+ files", "dir_nlink": "directories with 65000+ subdirs", "64bit": "64bit filesystem", "extents": "extent-based allocation", "ext4": true, "ext2": "EXT2/EXT3", "initialized": "initialized volume"}}]}]}, {"id": "cdrom", "class": "disk", "claimed": true, "handle": "SCSI:01:00:00:00", "description": "DVD reader", "product": "QEMU DVD-ROM", "vendor": "QEMU", "physid": "1", "businfo": "scsi@1:0.0.0", "logicalname": ["/dev/cdrom", "/dev/dvd", "/dev/sr0", "/run/live/persistence/sr0", "/usr/lib/live/mount/persistence/sr0"], "dev": "11:0", "version": "2.5+", "configuration": {"ansiversion": "5", "mount.fstype": "iso9660", "mount.options": "ro,noatime,nojoliet,check=s,map=n,blocksize=2048,iocharset=utf8", "state": "mounted", "status": "ready"}, "capabilities": {"removable": "support is removable", "audio": "Audio CD playback", "dvd": "DVD playback"}, "children": [{"id": "medium", "class": "disk", "claimed": true, "physid": "0", "logicalname": ["/dev/cdrom", "/run/live/persistence/sr0", "/usr/lib/live/mount/persistence/sr0"], "dev": "11:0", "configuration": {"mount.fstype": "iso9660", "mount.options": "ro,noatime,nojoliet,check=s,map=n,blocksize=2048,iocharset=utf8", "signature": "528cd03d", "state": "mounted"}, "capabilities": {"partitioned": "Partitioned disk", "partitioned:dos": "MS-DOS partition table"}, "children": [{"id": "volume", "class": "volume", "description": "Windows FAT volume", "vendor": "mkfs.fat", "physid": "2", "version": "FAT16", "serial": "31d5-6be2", "size": 18446744073709549568, "configuration": {"FATs": "2", "filesystem": "fat"}, "capabilities": {"primary": "Primary partition", "boot": "Contains boot code", "fat": "Windows FAT", "initialized": "initialized volume"}}]}]}]}, {"id": "bridge", "class": "bridge", "claimed": true, "handle": "PCI:0000:00:01.3", "description": "Bridge", "product": "82371AB/EB/MB PIIX4 ACPI", "vendor": "Intel Corporation", "physid": "1.3", "businfo": "pci@0000:00:01.3", "version": "03", "width": 32, "clock": 33000000, "configuration": {"driver": "piix4_smbus", "latency": "0"}, "capabilities": {"bridge": true}}, {"id": "display", "class": "display", "claimed": true, "handle": "PCI:0000:00:02.0", "description": "VGA compatible controller", "product": "bochs-drmdrmfb", "physid": "2", "businfo": "pci@0000:00:02.0", "logicalname": "/dev/fb0", "version": "02", "width": 32, "clock": 33000000, "configuration": {"depth": "32", "driver": "bochs-drm", "latency": "0", "resolution": "1024,768"}, "capabilities": {"vga_controller": true, "rom": "extension ROM", "fb": "framebuffer"}}, {"id": "network", "class": "network", "claimed": true, "handle": "PCI:0000:00:03.0", "description": "Ethernet interface", "product": "82540EM Gigabit Ethernet Controller", "vendor": "Intel Corporation", "physid": "3", "businfo": "pci@0000:00:03.0", "logicalname": "eth0", "version": "03", "serial": "52:54:00:12:34:56", "units": "bit/s", "size": 1000000000, "capacity": 1000000000, "width": 32, "clock": 33000000, "configuration": {"autonegotiation": "on", "broadcast": "yes", "driver": "e1000", "driverversion": "5.10.0-13-amd64", "duplex": "full", "ip": "10.0.2.15", "latency": "0", "link": "yes", "multicast": "yes", "port": "twisted pair", "speed": "1Gbit/s"}, "capabilities": {"bus_master": "bus mastering", "rom": "extension ROM", "ethernet": true, "physical": "Physical interface", "tp": "twisted pair", "10bt": "10Mbit/s", "10bt-fd": "10Mbit/s (full duplex)", "100bt": "100Mbit/s", "100bt-fd": "100Mbit/s (full duplex)", "1000bt-fd": "1Gbit/s (full duplex)", "autonegotiation": "Auto-negotiation"}}]}]}, {"id": "input:0", "class": "input", "claimed": true, "product": "AT Translated Set 2 keyboard", "physid": "1", "logicalname": ["input0", "/dev/input/event0", "input0::capslock", "input0::numlock", "input0::scrolllock"], "capabilities": {"i8042": "i8042 PC AT keyboard controller"}}, {"id": "input:1", "class": "input", "claimed": true, "product": "Power Button", "physid": "2", "logicalname": ["input2", "/dev/input/event1"], "capabilities": {"platform": true}}, {"id": "input:2", "class": "input", "claimed": true, "product": "ImExPS/2 Generic Explorer Mouse", "physid": "3", "logicalname": ["input3", "/dev/input/event2", "/dev/input/mouse0"], "capabilities": {"i8042": "i8042 PC AT keyboard controller"}}, {"id": "input:3", "class": "input", "claimed": true, "product": "PC Speaker", "physid": "4", "logicalname": ["input4", "/dev/input/event3"], "capabilities": {"isa": "ISA bus"}}]}, "dmidecode": "# dmidecode 3.3\nGetting SMBIOS data from sysfs.\nSMBIOS 2.8 present.\n9 structures occupying 429 bytes.\nTable at 0x000F5AB0.\n\nHandle 0x0000, DMI type 0, 24 bytes\nBIOS Information\n\tVendor: SeaBIOS\n\tVersion: ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31\n\tRelease Date: 04/01/2014\n\tAddress: 0xE8000\n\tRuntime Size: 96 kB\n\tROM Size: 64 kB\n\tCharacteristics:\n\t\tBIOS characteristics not supported\n\t\tTargeted content distribution is supported\n\tBIOS Revision: 0.0\n\nHandle 0x0100, DMI type 1, 27 bytes\nSystem Information\n\tManufacturer: QEMU\n\tProduct Name: Standard PC (i440FX + PIIX, 1996)\n\tVersion: pc-i440fx-5.2\n\tSerial Number: Not Specified\n\tUUID: Not Settable\n\tWake-up Type: Power Switch\n\tSKU Number: Not Specified\n\tFamily: Not Specified\n\nHandle 0x0300, DMI type 3, 22 bytes\nChassis Information\n\tManufacturer: QEMU\n\tType: Other\n\tLock: Not Present\n\tVersion: pc-i440fx-5.2\n\tSerial Number: Not Specified\n\tAsset Tag: Not Specified\n\tBoot-up State: Safe\n\tPower Supply State: Safe\n\tThermal State: Safe\n\tSecurity Status: Unknown\n\tOEM Information: 0x00000000\n\tHeight: Unspecified\n\tNumber Of Power Cords: Unspecified\n\tContained Elements: 0\n\tSKU Number: Not Specified\n\nHandle 0x0400, DMI type 4, 42 bytes\nProcessor Information\n\tSocket Designation: CPU 0\n\tType: Central Processor\n\tFamily: Other\n\tManufacturer: QEMU\n\tID: 63 06 00 00 FD FB 8B 07\n\tVersion: pc-i440fx-5.2\n\tVoltage: Unknown\n\tExternal Clock: Unknown\n\tMax Speed: 2000 MHz\n\tCurrent Speed: 2000 MHz\n\tStatus: Populated, Enabled\n\tUpgrade: Other\n\tL1 Cache Handle: Not Provided\n\tL2 Cache Handle: Not Provided\n\tL3 Cache Handle: Not Provided\n\tSerial Number: Not Specified\n\tAsset Tag: Not Specified\n\tPart Number: Not Specified\n\tCore Count: 1\n\tCore Enabled: 1\n\tThread Count: 1\n\tCharacteristics: None\n\nHandle 0x1000, DMI type 16, 23 bytes\nPhysical Memory Array\n\tLocation: Other\n\tUse: System Memory\n\tError Correction Type: Multi-bit ECC\n\tMaximum Capacity: 1 GB\n\tError Information Handle: Not Provided\n\tNumber Of Devices: 1\n\nHandle 0x1100, DMI type 17, 40 bytes\nMemory Device\n\tArray Handle: 0x1000\n\tError Information Handle: Not Provided\n\tTotal Width: Unknown\n\tData Width: Unknown\n\tSize: 1 GB\n\tForm Factor: DIMM\n\tSet: None\n\tLocator: DIMM 0\n\tBank Locator: Not Specified\n\tType: RAM\n\tType Detail: Other\n\tSpeed: Unknown\n\tManufacturer: QEMU\n\tSerial Number: Not Specified\n\tAsset Tag: Not Specified\n\tPart Number: Not Specified\n\tRank: Unknown\n\tConfigured Memory Speed: Unknown\n\tMinimum Voltage: Unknown\n\tMaximum Voltage: Unknown\n\tConfigured Voltage: Unknown\n\nHandle 0x1300, DMI type 19, 31 bytes\nMemory Array Mapped Address\n\tStarting Address: 0x00000000000\n\tEnding Address: 0x0003FFFFFFF\n\tRange Size: 1 GB\n\tPhysical Array Handle: 0x1000\n\tPartition Width: 1\n\nHandle 0x2000, DMI type 32, 11 bytes\nSystem Boot Information\n\tStatus: No errors detected\n\nHandle 0x7F00, DMI type 127, 4 bytes\nEnd Of Table\n\n", "lspci": "00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)\n\tSubsystem: Red Hat, Inc. Qemu virtual machine\n\tControl: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-\n\tStatus: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-\n\n00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]\n\tSubsystem: Red Hat, Inc. Qemu virtual machine\n\tControl: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-\n\tStatus: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-\n\n00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] (prog-if 80 [ISA Compatibility mode-only controller, supports bus mastering])\n\tSubsystem: Red Hat, Inc. Qemu virtual machine\n\tControl: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-\n\tStatus: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-\n\tLatency: 0\n\tRegion 0: Memory at 000001f0 (32-bit, non-prefetchable) [virtual] [size=8]\n\tRegion 1: Memory at 000003f0 (type 3, non-prefetchable) [virtual]\n\tRegion 2: Memory at 00000170 (32-bit, non-prefetchable) [virtual] [size=8]\n\tRegion 3: Memory at 00000370 (type 3, non-prefetchable) [virtual]\n\tRegion 4: I/O ports at c040 [virtual] [size=16]\n\tKernel driver in use: ata_piix\n\tKernel modules: ata_piix, ata_generic\n\n00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)\n\tSubsystem: Red Hat, Inc. Qemu virtual machine\n\tControl: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-\n\tStatus: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-\n\tInterrupt: pin A routed to IRQ 9\n\tKernel driver in use: piix4_smbus\n\tKernel modules: i2c_piix4\n\n00:02.0 VGA compatible controller: Device 1234:1111 (rev 02) (prog-if 00 [VGA controller])\n\tSubsystem: Red Hat, Inc. Device 1100\n\tControl: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-\n\tStatus: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-\n\tRegion 0: Memory at fd000000 (32-bit, prefetchable) [size=16M]\n\tRegion 2: Memory at febf0000 (32-bit, non-prefetchable) [size=4K]\n\tExpansion ROM at 000c0000 [disabled] [size=128K]\n\tKernel driver in use: bochs-drm\n\tKernel modules: bochs_drm\n\n00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 03)\n\tSubsystem: Red Hat, Inc. QEMU Virtual Machine\n\tPhysical Slot: 3\n\tControl: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-\n\tStatus: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-\n\tLatency: 0\n\tInterrupt: pin A routed to IRQ 11\n\tRegion 0: Memory at febc0000 (32-bit, non-prefetchable) [size=128K]\n\tRegion 1: I/O ports at c000 [size=64]\n\tExpansion ROM at feb80000 [disabled] [size=256K]\n\tKernel driver in use: e1000\n\tKernel modules: e1000\n\n", "hwinfo": "01: None 00.0: 0102 Floppy disk controller\n  [Created at floppy.112]\n  Unique ID: rdCR.3wRL2_g4d2B\n  Hardware Class: storage\n  Model: \"Floppy disk controller\"\n  I/O Port: 0x3f2 (rw)\n  I/O Ports: 0x3f4-0x3f5 (rw)\n  I/O Port: 0x3f7 (rw)\n  DMA: 2\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n02: Floppy 00.0: 10603 Floppy Disk\n  [Created at floppy.127]\n  Unique ID: sPPV.oZ89vuho4Y3\n  Parent ID: rdCR.3wRL2_g4d2B\n  Hardware Class: floppy\n  Model: \"Floppy Disk\"\n  Device File: /dev/fd0\n  Size: 3.5 ''\n  Size: 5760 sectors a 512 bytes\n  Capacity: 0 GB (2949120 bytes)\n  Drive status: no medium\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n  Attached to: #1 (Floppy disk controller)\n\n03: None 00.0: 10105 BIOS\n  [Created at bios.186]\n  Unique ID: rdCR.lZF+r4EgHp4\n  Hardware Class: bios\n  BIOS Keyboard LED Status:\n    Scroll Lock: off\n    Num Lock: off\n    Caps Lock: off\n  Serial Port 0: 0x3f8\n  Parallel Port 0: 0x378\n  Base Memory: 639 kB\n  PnP BIOS: @@@0000\n  BIOS: extended read supported\n  MP spec rev 1.4 info:\n    OEM id: \"BOCHSCPU\"\n    Product id: \"0.1\"\n    1 CPUs (0 disabled)\n  BIOS32 Service Directory Entry: 0xfd243\n  SMBIOS Version: 2.8\n  BIOS Info: #0\n    Vendor: \"SeaBIOS\"\n    Version: \"?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31\"\n    Date: \"04/01/2014\"\n    Start Address: 0xe8000\n    ROM Size: 64 kB\n    Features: 0x04000000000000000008\n  System Info: #256\n    Manufacturer: \"QEMU\"\n    Product: \"Standard PC (i440FX + PIIX, 1996)\"\n    Version: \"pc-i440fx-5.2\"\n    UUID: undefined\n    Wake-up: 0x06 (Power Switch)\n  Chassis Info: #768\n    Manufacturer: \"QEMU\"\n    Version: \"pc-i440fx-5.2\"\n    Type: 0x01 (Other)\n    Bootup State: 0x03 (Safe)\n    Power Supply State: 0x03 (Safe)\n    Thermal State: 0x03 (Safe)\n    Security Status: 0x02 (Unknown)\n  Processor Info: #1024\n    Socket: \"CPU 0\"\n    Socket Type: 0x01 (Other)\n    Socket Status: Populated\n    Type: 0x03 (CPU)\n    Family: 0x01 (Other)\n    Manufacturer: \"QEMU\"\n    Version: \"pc-i440fx-5.2\"\n    Processor ID: 0x078bfbfd00000663\n    Status: 0x01 (Enabled)\n    Max. Speed: 2000 MHz\n    Current Speed: 2000 MHz\n  Physical Memory Array: #4096\n    Use: 0x03 (System memory)\n    Location: 0x01 (Other)\n    Slots: 1\n    Max. Size: 1 GB\n    ECC: 0x06 (Multi-bit)\n  Memory Device: #4352\n    Location: \"DIMM 0\"\n    Manufacturer: \"QEMU\"\n    Memory Array: #4096\n    Form Factor: 0x09 (DIMM)\n    Type: 0x07 (RAM)\n    Type Detail: 0x0002 (Other)\n    Data Width: 0 bits\n    Size: 1 GB\n  Memory Array Mapping: #4864\n    Memory Array: #4096\n    Partition Width: 1\n    Start Address: 0x00000000\n    End Address: 0x40000000\n  Type 32 Record: #8192\n    Data 00: 20 0b 00 20 00 00 00 00 00 00 00\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n04: None 00.0: 10107 System\n  [Created at sys.64]\n  Unique ID: rdCR.n_7QNeEnh23\n  Hardware Class: system\n  Model: \"System\"\n  Formfactor: \"desktop\"\n  Driver Info #0:\n    Driver Status: thermal,fan are not active\n    Driver Activation Cmd: \"modprobe thermal; modprobe fan\"\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n05: None 00.0: 10104 FPU\n  [Created at misc.191]\n  Unique ID: rdCR.EMpH5pjcahD\n  Hardware Class: unknown\n  Model: \"FPU\"\n  I/O Ports: 0xf0-0xff (rw)\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n06: None 00.0: 0801 DMA controller (8237)\n  [Created at misc.205]\n  Unique ID: rdCR.f5u1ucRm+H9\n  Hardware Class: unknown\n  Model: \"DMA controller\"\n  I/O Ports: 0x00-0xcf7 (rw)\n  I/O Ports: 0xc0-0xdf (rw)\n  I/O Ports: 0x80-0x8f (rw)\n  DMA: 4\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n07: None 00.0: 0800 PIC (8259)\n  [Created at misc.218]\n  Unique ID: rdCR.8uRK7LxiIA2\n  Hardware Class: unknown\n  Model: \"PIC\"\n  I/O Ports: 0x20-0x21 (rw)\n  I/O Ports: 0xa0-0xa1 (rw)\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n08: None 00.0: 0900 Keyboard controller\n  [Created at misc.250]\n  Unique ID: rdCR.9N+EecqykME\n  Hardware Class: unknown\n  Model: \"Keyboard controller\"\n  I/O Port: 0x60 (rw)\n  I/O Port: 0x64 (rw)\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n09: None 00.0: 0701 Parallel controller (SPP)\n  [Created at misc.261]\n  Unique ID: YMnp.ecK7NLYWZ5D\n  Hardware Class: unknown\n  Model: \"Parallel controller\"\n  Device File: /dev/lp0\n  I/O Ports: 0x378-0x37a (rw)\n  I/O Ports: 0x37b-0x37f (rw)\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n10: None 00.0: 10400 PS/2 Controller\n  [Created at misc.303]\n  Unique ID: rdCR.DziBbWO85o5\n  Hardware Class: unknown\n  Model: \"PS/2 Controller\"\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n12: None 00.0: 10102 Main Memory\n  [Created at memory.74]\n  Unique ID: rdCR.CxwsZFjVASF\n  Hardware Class: memory\n  Model: \"Main Memory\"\n  Memory Range: 0x00000000-0x3d063fff (rw)\n  Memory Size: 960 MB\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n13: PCI 01.0: 0601 ISA bridge\n  [Created at pci.386]\n  Unique ID: vSkL.ucdhKwLeeAA\n  SysFS ID: /devices/pci0000:00/0000:00:01.0\n  SysFS BusID: 0000:00:01.0\n  Hardware Class: bridge\n  Model: \"Red Hat Qemu virtual machine\"\n  Vendor: pci 0x8086 \"Intel Corporation\"\n  Device: pci 0x7000 \"82371SB PIIX3 ISA [Natoma/Triton II]\"\n  SubVendor: pci 0x1af4 \"Red Hat, Inc.\"\n  SubDevice: pci 0x1100 \"Qemu virtual machine\"\n  Module Alias: \"pci:v00008086d00007000sv00001AF4sd00001100bc06sc01i00\"\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n14: PCI 00.0: 0600 Host bridge\n  [Created at pci.386]\n  Unique ID: qLht.YeL3TKDjrxE\n  SysFS ID: /devices/pci0000:00/0000:00:00.0\n  SysFS BusID: 0000:00:00.0\n  Hardware Class: bridge\n  Model: \"Red Hat Qemu virtual machine\"\n  Vendor: pci 0x8086 \"Intel Corporation\"\n  Device: pci 0x1237 \"440FX - 82441FX PMC [Natoma]\"\n  SubVendor: pci 0x1af4 \"Red Hat, Inc.\"\n  SubDevice: pci 0x1100 \"Qemu virtual machine\"\n  Revision: 0x02\n  Module Alias: \"pci:v00008086d00001237sv00001AF4sd00001100bc06sc00i00\"\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n15: PCI 01.3: 0680 Bridge\n  [Created at pci.386]\n  Unique ID: VRCs.M9Cc8lcQjE2\n  SysFS ID: /devices/pci0000:00/0000:00:01.3\n  SysFS BusID: 0000:00:01.3\n  Hardware Class: bridge\n  Model: \"Red Hat Qemu virtual machine\"\n  Vendor: pci 0x8086 \"Intel Corporation\"\n  Device: pci 0x7113 \"82371AB/EB/MB PIIX4 ACPI\"\n  SubVendor: pci 0x1af4 \"Red Hat, Inc.\"\n  SubDevice: pci 0x1100 \"Qemu virtual machine\"\n  Revision: 0x03\n  Driver: \"piix4_smbus\"\n  Driver Modules: \"i2c_piix4\"\n  IRQ: 9 (no events)\n  Module Alias: \"pci:v00008086d00007113sv00001AF4sd00001100bc06sc80i00\"\n  Driver Info #0:\n    Driver Status: i2c_piix4 is active\n    Driver Activation Cmd: \"modprobe i2c_piix4\"\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n16: PCI 03.0: 0200 Ethernet controller\n  [Created at pci.386]\n  Unique ID: rBUF.amjFVOTKCI8\n  SysFS ID: /devices/pci0000:00/0000:00:03.0\n  SysFS BusID: 0000:00:03.0\n  Hardware Class: network\n  Model: \"Red Hat QEMU Virtual Machine\"\n  Vendor: pci 0x8086 \"Intel Corporation\"\n  Device: pci 0x100e \"82540EM Gigabit Ethernet Controller\"\n  SubVendor: pci 0x1af4 \"Red Hat, Inc.\"\n  SubDevice: pci 0x1100 \"QEMU Virtual Machine\"\n  Revision: 0x03\n  Driver: \"e1000\"\n  Driver Modules: \"e1000\"\n  Device File: eth0\n  Memory Range: 0xfebc0000-0xfebdffff (rw,non-prefetchable)\n  I/O Ports: 0xc000-0xc03f (rw)\n  Memory Range: 0xfeb80000-0xfebbffff (ro,non-prefetchable,disabled)\n  IRQ: 11 (20 events)\n  HW Address: 52:54:00:12:34:56\n  Permanent HW Address: 52:54:00:12:34:56\n  Link detected: yes\n  Module Alias: \"pci:v00008086d0000100Esv00001AF4sd00001100bc02sc00i00\"\n  Driver Info #0:\n    Driver Status: e1000 is active\n    Driver Activation Cmd: \"modprobe e1000\"\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n17: PCI 01.1: 0101 IDE interface (ISA Compatibility mode-only controller, supports bus mastering)\n  [Created at pci.386]\n  Unique ID: mnDB.3sKqaxiizg6\n  SysFS ID: /devices/pci0000:00/0000:00:01.1\n  SysFS BusID: 0000:00:01.1\n  Hardware Class: storage\n  Model: \"Red Hat Qemu virtual machine\"\n  Vendor: pci 0x8086 \"Intel Corporation\"\n  Device: pci 0x7010 \"82371SB PIIX3 IDE [Natoma/Triton II]\"\n  SubVendor: pci 0x1af4 \"Red Hat, Inc.\"\n  SubDevice: pci 0x1100 \"Qemu virtual machine\"\n  Driver: \"ata_piix\"\n  Driver Modules: \"ata_piix\"\n  I/O Ports: 0x1f0-0x1f7 (rw)\n  I/O Port: 0x3f6 (rw)\n  I/O Ports: 0x170-0x177 (rw)\n  I/O Port: 0x376 (rw)\n  I/O Ports: 0xc040-0xc04f (rw)\n  Module Alias: \"pci:v00008086d00007010sv00001AF4sd00001100bc01sc01i80\"\n  Driver Info #0:\n    Driver Status: ata_piix is active\n    Driver Activation Cmd: \"modprobe ata_piix\"\n  Driver Info #1:\n    Driver Status: ata_generic is active\n    Driver Activation Cmd: \"modprobe ata_generic\"\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n18: PCI 02.0: 0300 VGA compatible controller (VGA)\n  [Created at pci.386]\n  Unique ID: _Znp.WspiKb87LiA\n  SysFS ID: /devices/pci0000:00/0000:00:02.0\n  SysFS BusID: 0000:00:02.0\n  Hardware Class: graphics card\n  Model: \"VGA compatible controller\"\n  Vendor: pci 0x1234 \n  Device: pci 0x1111 \n  SubVendor: pci 0x1af4 \"Red Hat, Inc.\"\n  SubDevice: pci 0x1100 \n  Revision: 0x02\n  Driver: \"bochs-drm\"\n  Driver Modules: \"bochs_drm\"\n  Memory Range: 0xfd000000-0xfdffffff (ro,non-prefetchable)\n  Memory Range: 0xfebf0000-0xfebf0fff (rw,non-prefetchable)\n  Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)\n  I/O Ports: 0x3c0-0x3df (rw)\n  Module Alias: \"pci:v00001234d00001111sv00001AF4sd00001100bc03sc00i00\"\n  Driver Info #0:\n    Driver Status: bochs_drm is active\n    Driver Activation Cmd: \"modprobe bochs_drm\"\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n19: None 00.0: 10002 LCD Monitor\n  [Created at monitor.125]\n  Unique ID: rdCR.AenZDShaZ_5\n  Parent ID: _Znp.WspiKb87LiA\n  Hardware Class: monitor\n  Model: \"QEMU Monitor\"\n  Vendor: RHT \n  Device: eisa 0x1234 \"QEMU Monitor\"\n  Resolution: 640x480@60Hz\n  Resolution: 800x600@60Hz\n  Resolution: 1024x768@60Hz\n  Resolution: 2048x1152@60Hz\n  Resolution: 1920x1080@60Hz\n  Size: 260x195 mm\n  Year of Manufacture: 2014\n  Week of Manufacture: 42\n  Detailed Timings #0:\n     Resolution: 1024x768\n     Horizontal: 1024 1280 1310 1382 (+256 +286 +358) -hsync\n       Vertical:  768  771  774  794 (+3 +6 +26) -vsync\n    Frequencies: 82.29 MHz, 59.54 kHz, 74.99 Hz\n  Driver Info #0:\n    Max. Resolution: 2048x1152\n    Vert. Sync Range: 50-125 Hz\n    Hor. Sync Range: 30-160 kHz\n    Bandwidth: 82 MHz\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n  Attached to: #18 (VGA compatible controller)\n\n20: None 00.0: 0700 Serial controller (16550)\n  [Created at serial.74]\n  Unique ID: S_Uw.3fyvFV+mbWD\n  Hardware Class: unknown\n  Model: \"16550A\"\n  Device: \"16550A\"\n  Device File: /dev/ttyS0\n  I/O Ports: 0x3f8-0x3ff (rw)\n  IRQ: 4 (1 event)\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n21: SCSI 100.0: 10602 CD-ROM (DVD)\n  [Created at block.249]\n  Unique ID: KD9E.53N0UD4ozwD\n  Parent ID: mnDB.3sKqaxiizg6\n  SysFS ID: /class/block/sr0\n  SysFS BusID: 1:0:0:0\n  SysFS Device Link: /devices/pci0000:00/0000:00:01.1/ata2/host1/target1:0:0/1:0:0:0\n  Hardware Class: cdrom\n  Model: \"QEMU DVD-ROM\"\n  Vendor: \"QEMU\"\n  Device: \"QEMU DVD-ROM\"\n  Revision: \"2.5+\"\n  Driver: \"ata_piix\", \"sr\"\n  Driver Modules: \"ata_piix\", \"sr_mod\"\n  Device File: /dev/sr0 (/dev/sg1)\n  Device Files: /dev/sr0, /dev/dvd, /dev/disk/by-path/pci-0000:00:01.1-ata-2.0, /dev/disk/by-id/ata-QEMU_DVD-ROM_QM00003, /dev/disk/by-path/pci-0000:00:01.1-ata-2, /dev/disk/by-label/DEBIAN_CUSTOM, /dev/cdrom, /dev/disk/by-uuid/2022-04-11-17-19-25-00\n  Device Number: block 11:0 (char 21:1)\n  Features: DVD, MRW, MRW-W\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n  Attached to: #17 (IDE interface)\n  Drive Speed: 4\n  Volume ID: \"DEBIAN_CUSTOM\"\n  Preparer: \"XORRISO-1.5.0 2018.09.15.133001, LIBISOBURN-1.5.0, LIBISOFS-1.5.0, LIBBURN-1.5.0\"\n  Creation date: \"2022041117192500\"\n  El Torito info: platform 0, bootable\n    Boot Catalog: at sector 0x0033\n    Media: none starting at sector 0x2834\n    Load: 2048 bytes\n\n22: None 00.0: 10600 Disk\n  [Created at block.245]\n  Unique ID: kwWm.Fxp0d3BezAE\n  SysFS ID: /class/block/fd0\n  SysFS BusID: floppy.0\n  SysFS Device Link: /devices/platform/floppy.0\n  Hardware Class: disk\n  Model: \"Disk\"\n  Driver: \"floppy\"\n  Driver Modules: \"floppy\"\n  Device File: /dev/fd0\n  Device Number: block 2:0\n  Size: 8 sectors a 512 bytes\n  Capacity: 0 GB (4096 bytes)\n  Drive status: no medium\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n23: IDE 00.0: 10600 Disk\n  [Created at block.245]\n  Unique ID: 3OOL.W8iGvCekDp8\n  Parent ID: mnDB.3sKqaxiizg6\n  SysFS ID: /class/block/sda\n  SysFS BusID: 0:0:0:0\n  SysFS Device Link: /devices/pci0000:00/0000:00:01.1/ata1/host0/target0:0:0/0:0:0:0\n  Hardware Class: disk\n  Model: \"QEMU HARDDISK\"\n  Vendor: \"QEMU\"\n  Device: \"HARDDISK\"\n  Revision: \"2.5+\"\n  Serial ID: \"QM00001\"\n  Driver: \"ata_piix\", \"sd\"\n  Driver Modules: \"ata_piix\", \"sd_mod\"\n  Device File: /dev/sda\n  Device Files: /dev/sda, /dev/disk/by-path/pci-0000:00:01.1-ata-1.0, /dev/disk/by-path/pci-0000:00:01.1-ata-1, /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001\n  Device Number: block 8:0-8:15\n  BIOS id: 0x80\n  Geometry (Logical): CHS 5221/255/63\n  Size: 83886081 sectors a 512 bytes\n  Capacity: 40 GB (42949673472 bytes)\n  Geometry (BIOS EDD): CHS 83220/16/63\n  Size (BIOS EDD): 83886081 sectors\n  Geometry (BIOS Legacy): CHS 1023/255/63\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n  Attached to: #17 (IDE interface)\n\n24: None 00.0: 11300 Partition\n  [Created at block.434]\n  Unique ID: bdUI.SE1wIdpsiiC\n  Parent ID: 3OOL.W8iGvCekDp8\n  SysFS ID: /class/block/sda/sda1\n  Hardware Class: partition\n  Model: \"Partition\"\n  Device File: /dev/sda1\n  Device Files: /dev/sda1, /dev/disk/by-uuid/666140b3-42b9-4940-8d82-7d894261231f, /dev/disk/by-partuuid/c338ebd4-01, /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part1, /dev/disk/by-path/pci-0000:00:01.1-ata-1-part1, /dev/disk/by-path/pci-0000:00:01.1-ata-1.0-part1\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n  Attached to: #23 (Disk)\n\n25: None 00.0: 11300 Partition\n  [Created at block.434]\n  Unique ID: 2pkM.SE1wIdpsiiC\n  Parent ID: 3OOL.W8iGvCekDp8\n  SysFS ID: /class/block/sda/sda2\n  Hardware Class: partition\n  Model: \"Partition\"\n  Device File: /dev/sda2\n  Device Files: /dev/sda2, /dev/disk/by-path/pci-0000:00:01.1-ata-1-part2, /dev/disk/by-partuuid/c338ebd4-02, /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part2, /dev/disk/by-path/pci-0000:00:01.1-ata-1.0-part2\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n  Attached to: #23 (Disk)\n\n26: None 00.0: 11300 Partition\n  [Created at block.434]\n  Unique ID: QLVZ.SE1wIdpsiiC\n  Parent ID: 3OOL.W8iGvCekDp8\n  SysFS ID: /class/block/sda/sda5\n  Hardware Class: partition\n  Model: \"Partition\"\n  Device File: /dev/sda5\n  Device Files: /dev/sda5, /dev/disk/by-partuuid/c338ebd4-05, /dev/disk/by-path/pci-0000:00:01.1-ata-1-part5, /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part5, /dev/disk/by-uuid/5149082d-e5ab-4ccb-b75d-52a8b4da4fc8, /dev/disk/by-path/pci-0000:00:01.1-ata-1.0-part5\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n  Attached to: #23 (Disk)\n\n27: None 00.0: 11300 Partition\n  [Created at block.434]\n  Unique ID: tWld.SE1wIdpsiiC\n  Parent ID: 3OOL.W8iGvCekDp8\n  SysFS ID: /class/block/sda/sda6\n  Hardware Class: partition\n  Model: \"Partition\"\n  Device File: /dev/sda6\n  Device Files: /dev/sda6, /dev/disk/by-path/pci-0000:00:01.1-ata-1.0-part6, /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part6, /dev/disk/by-uuid/cc4fd343-e6f4-4376-937e-f5d2fbcb48c7, /dev/disk/by-partuuid/c338ebd4-06, /dev/disk/by-path/pci-0000:00:01.1-ata-1-part6\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n  Attached to: #23 (Disk)\n\n28: PS/2 00.0: 10800 Keyboard\n  [Created at input.226]\n  Unique ID: nLyy.+49ps10DtUF\n  Hardware Class: keyboard\n  Model: \"AT Translated Set 2 keyboard\"\n  Vendor: 0x0001 \n  Device: 0x0001 \"AT Translated Set 2 keyboard\"\n  Compatible to: int 0x0211 0x0001\n  Device File: /dev/input/event0\n  Device Files: /dev/input/event0, /dev/input/by-path/platform-i8042-serio-0-event-kbd\n  Device Number: char 13:64\n  Driver Info #0:\n    XkbRules: xfree86\n    XkbModel: pc104\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n29: PS/2 00.0: 10500 PS/2 Mouse\n  [Created at input.249]\n  Unique ID: AH6Q.bGO0sOimOM3\n  Hardware Class: mouse\n  Model: \"VMware Mouse\"\n  Vendor: int 0x15ad \"VMware\"\n  Device: int 0x0100 \"Mouse\"\n  Compatible to: int 0x0210 0x0025\n  Device File: /dev/input/mice (/dev/input/mouse0)\n  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse\n  Device Number: char 13:63 (char 13:32)\n  Driver Info #0:\n    Buttons: 5\n    Wheels: 2\n    XFree86 Protocol: explorerps/2\n    GPM Protocol: exps2\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n30: None 00.0: 10103 CPU\n  [Created at cpu.465]\n  Unique ID: rdCR.j8NaKXDZtZ6\n  Hardware Class: cpu\n  Arch: X86-64\n  Vendor: \"AuthenticAMD\"\n  Model: 6.6.3 \"QEMU Virtual CPU version 2.5+\"\n  Features: fpu,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,syscall,nx,lm,nopl,cpuid,pni,cx16,hypervisor,lahf_lm,svm,3dnowprefetch,vmmcall\n  Clock: 2904 MHz\n  BogoMips: 5808.03\n  Cache: 512 kb\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n31: None 00.0: 10700 Loopback\n  [Created at net.126]\n  Unique ID: ZsBS.GQNx7L4uPNA\n  SysFS ID: /class/net/lo\n  Hardware Class: network interface\n  Model: \"Loopback network interface\"\n  Device File: lo\n  Link detected: yes\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n32: None 00.0: 10701 Ethernet\n  [Created at net.126]\n  Unique ID: usDW.ndpeucax6V1\n  Parent ID: rBUF.amjFVOTKCI8\n  SysFS ID: /class/net/eth0\n  SysFS Device Link: /devices/pci0000:00/0000:00:03.0\n  Hardware Class: network interface\n  Model: \"Ethernet network interface\"\n  Driver: \"e1000\"\n  Driver Modules: \"e1000\"\n  Device File: eth0\n  HW Address: 52:54:00:12:34:56\n  Permanent HW Address: 52:54:00:12:34:56\n  Link detected: yes\n  Config Status: cfg=new, avail=yes, need=no, active=unknown\n  Attached to: #16 (Ethernet controller)\n", "smart": [{"json_format_version": [1, 0], "smartctl": {"argv": ["smartctl", "-x", "--json=cosviu", "/dev/fd0"], "build_info": "(local build)", "exit_status": 1, "messages": [{"severity": "error", "string": "/dev/fd0: Unable to detect device type"}], "output": ["smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-13-amd64] (local build)", "Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org", "", "/dev/fd0: Unable to detect device type", "Please specify device type with the -d option.", "", "Use smartctl -h to get a usage summary", ""], "platform_info": "x86_64-linux-5.10.0-13-amd64", "svn_revision": "5155", "version": [7, 2]}, "smartctl_0001_i": "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-13-amd64] (local build)", "smartctl_0002_i": "Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org", "smartctl_0004_i": "/dev/fd0: Unable to detect device type", "smartctl_0005_u": "Please specify device type with the -d option.", "smartctl_0007_u": "Use smartctl -h to get a usage summary"}, {"ata_smart_attributes": {"revision": 1, "table": [{"flags": {"auto_keep": false, "error_rate": false, "event_count": false, "performance": false, "prefailure": true, "string": "PO---- ", "updated_online": true, "value": 3}, "id": 1, "name": "Raw_Read_Error_Rate", "raw": {"string": "0", "value": 0}, "thresh": 6, "value": 100, "when_failed": "", "worst": 100}, {"flags": {"auto_keep": false, "error_rate": false, "event_count": false, "performance": false, "prefailure": true, "string": "PO---- ", "updated_online": true, "value": 3}, "id": 3, "name": "Spin_Up_Time", "raw": {"string": "16", "value": 16}, "thresh": 0, "value": 100, "when_failed": "", "worst": 100}, {"flags": {"auto_keep": false, "error_rate": false, "event_count": false, "performance": false, "prefailure": false, "string": "-O---- ", "updated_online": true, "value": 2}, "id": 4, "name": "Start_Stop_Count", "raw": {"string": "100", "value": 100}, "thresh": 20, "value": 100, "when_failed": "", "worst": 100}, {"flags": {"auto_keep": false, "error_rate": false, "event_count": false, "performance": false, "prefailure": true, "string": "PO---- ", "updated_online": true, "value": 3}, "id": 5, "name": "Reallocated_Sector_Ct", "raw": {"string": "0", "value": 0}, "thresh": 36, "value": 100, "when_failed": "", "worst": 100}, {"flags": {"auto_keep": false, "error_rate": false, "event_count": false, "performance": false, "prefailure": true, "string": "PO---- ", "updated_online": true, "value": 3}, "id": 9, "name": "Power_On_Hours", "raw": {"string": "1", "value": 1}, "thresh": 0, "value": 100, "when_failed": "", "worst": 100}, {"flags": {"auto_keep": false, "error_rate": false, "event_count": false, "performance": false, "prefailure": true, "string": "PO---- ", "updated_online": true, "value": 3}, "id": 12, "name": "Power_Cycle_Count", "raw": {"string": "0", "value": 0}, "thresh": 0, "value": 100, "when_failed": "", "worst": 100}, {"flags": {"auto_keep": false, "error_rate": false, "event_count": false, "performance": false, "prefailure": true, "string": "PO---- ", "updated_online": true, "value": 3}, "id": 190, "name": "Airflow_Temperature_Cel", "raw": {"string": "31 (Min/Max 31/31)", "value": 522125343}, "thresh": 50, "value": 69, "when_failed": "", "worst": 69}]}, "ata_smart_data": {"capabilities": {"attribute_autosave_enabled": true, "conveyance_self_test_supported": false, "error_logging_supported": true, "exec_offline_immediate_supported": true, "gp_logging_supported": false, "offline_is_aborted_upon_new_cmd": false, "offline_surface_scan_supported": true, "selective_self_test_supported": false, "self_tests_supported": true, "values": [25, 3]}, "offline_data_collection": {"completion_seconds": 288, "status": {"passed": true, "string": "was completed without error", "value": 130}}, "self_test": {"polling_minutes": {"extended": 54, "short": 2}, "status": {"passed": true, "string": "completed without error", "value": 0}}}, "ata_smart_error_log": {"summary": {"count": 0, "revision": 1}}, "ata_smart_self_test_log": {"standard": {"count": 0, "revision": 1}}, "ata_version": {"major_value": 240, "minor_value": 22, "string": "ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000"}, "device": {"info_name": "/dev/sda [SAT]", "name": "/dev/sda", "protocol": "ATA", "type": "sat"}, "firmware_version": "2.5+", "in_smartctl_database": false, "json_format_version": [1, 0], "local_time": {"asctime": "Mon Apr 18 08:08:25 2022 UTC", "time_t": 1650269305}, "logical_block_size": 512, "model_name": "QEMU HARDDISK", "physical_block_size": 512, "power_cycle_count": 0, "power_on_time": {"hours": 1}, "serial_number": "QM00001", "smart_status": {"passed": true}, "smartctl": {"argv": ["smartctl", "-x", "--json=cosviu", "/dev/sda"], "build_info": "(local build)", "exit_status": 4, "output": ["smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-13-amd64] (local build)", "Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org", "", "=== START OF INFORMATION SECTION ===", "Device Model:     QEMU HARDDISK", "Serial Number:    QM00001", "Firmware Version: 2.5+", "User Capacity:    42,949,673,472 bytes [42.9 GB]", "Sector Size:      512 bytes logical/physical", "TRIM Command:     Available, deterministic", "Device is:        Not in smartctl database [for details use: -P showall]", "ATA Version is:   ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000", "Local Time is:    Mon Apr 18 08:08:25 2022 UTC", "SMART support is: Available - device has SMART capability.", "SMART support is: Enabled", "AAM feature is:   Unavailable", "APM feature is:   Unavailable", "Rd look-ahead is: Unavailable", "Write cache is:   Enabled", "DSN feature is:   Unavailable", "ATA Security is:  Unavailable", "Wt Cache Reorder: Unavailable", "", "=== START OF READ SMART DATA SECTION ===", "SMART overall-health self-assessment test result: PASSED", "", "General SMART Values:", "Offline data collection status:  (0x82)\tOffline data collection activity", "\t\t\t\t\twas completed without error.", "\t\t\t\t\tAuto Offline Data Collection: Enabled.", "Self-test execution status:      (   0)\tThe previous self-test routine completed", "\t\t\t\t\twithout error or no self-test has ever ", "\t\t\t\t\tbeen run.", "Total time to complete Offline ", "data collection: \t\t(  288) seconds.", "Offline data collection", "capabilities: \t\t\t (0x19) SMART execute Offline immediate.", "\t\t\t\t\tNo Auto Offline data collection support.", "\t\t\t\t\tSuspend Offline collection upon new", "\t\t\t\t\tcommand.", "\t\t\t\t\tOffline surface scan supported.", "\t\t\t\t\tSelf-test supported.", "\t\t\t\t\tNo Conveyance Self-test supported.", "\t\t\t\t\tNo Selective Self-test supported.", "SMART capabilities:            (0x0003)\tSaves SMART data before entering", "\t\t\t\t\tpower-saving mode.", "\t\t\t\t\tSupports SMART auto save timer.", "Error logging capability:        (0x01)\tError logging supported.", "\t\t\t\t\tNo General Purpose Logging support.", "Short self-test routine ", "recommended polling time: \t (   2) minutes.", "Extended self-test routine", "recommended polling time: \t (  54) minutes.", "", "SMART Attributes Data Structure revision number: 1", "Vendor Specific SMART Attributes with Thresholds:", "ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE", "  1 Raw_Read_Error_Rate     PO----   100   100   006    -    0", "  3 Spin_Up_Time            PO----   100   100   000    -    16", "  4 Start_Stop_Count        -O----   100   100   020    -    100", "  5 Reallocated_Sector_Ct   PO----   100   100   036    -    0", "  9 Power_On_Hours          PO----   100   100   000    -    1", " 12 Power_Cycle_Count       PO----   100   100   000    -    0", "190 Airflow_Temperature_Cel PO----   069   069   050    -    31 (Min/Max 31/31)", "                            ||||||_ K auto-keep", "                            |||||__ C event count", "                            ||||___ R error rate", "                            |||____ S speed/performance", "                            ||_____ O updated online", "                            |______ P prefailure warning", "", "Read SMART Log Directory failed: scsi error badly formed scsi parameters", "", "General Purpose Log Directory not supported", "", "SMART Extended Comprehensive Error Log (GP Log 0x03) not supported", "", "SMART Error Log Version: 1", "No Errors Logged", "", "SMART Extended Self-test Log (GP Log 0x07) not supported", "", "SMART Self-test log structure revision number 1", "No self-tests have been logged.  [To run self-tests, use: smartctl -t]", "", "Selective Self-tests/Logging not supported", "", "SCT Commands not supported", "", "Device Statistics (GP/SMART Log 0x04) not supported", "", "Pending Defects log (GP Log 0x0c) not supported", "", "SATA Phy Event Counters (GP Log 0x11) not supported", ""], "platform_info": "x86_64-linux-5.10.0-13-amd64", "svn_revision": "5155", "version": [7, 2]}, "smartctl_0001_i": "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-13-amd64] (local build)", "smartctl_0002_i": "Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org", "smartctl_0004_u": "=== START OF INFORMATION SECTION ===", "smartctl_0005_i": "Device Model:     QEMU HARDDISK", "smartctl_0006_i": "Serial Number:    QM00001", "smartctl_0007_i": "Firmware Version: 2.5+", "smartctl_0008_i": "User Capacity:    42,949,673,472 bytes [42.9 GB]", "smartctl_0009_i": "Sector Size:      512 bytes logical/physical", "smartctl_0010_i": "TRIM Command:     Available, deterministic", "smartctl_0011_i": "Device is:        Not in smartctl database [for details use: -P showall]", "smartctl_0012_i": "ATA Version is:   ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000", "smartctl_0013_i": "Local Time is:    Mon Apr 18 08:08:25 2022 UTC", "smartctl_0014_u": "SMART support is: Available - device has SMART capability.", "smartctl_0015_u": "SMART support is: Enabled", "smartctl_0016_u": "AAM feature is:   Unavailable", "smartctl_0017_u": "APM feature is:   Unavailable", "smartctl_0018_u": "Rd look-ahead is: Unavailable", "smartctl_0019_i": "Write cache is:   Enabled", "smartctl_0020_u": "DSN feature is:   Unavailable", "smartctl_0021_u": "ATA Security is:  Unavailable", "smartctl_0022_u": "Wt Cache Reorder: Unavailable", "smartctl_0024_u": "=== START OF READ SMART DATA SECTION ===", "smartctl_0025_i": "SMART overall-health self-assessment test result: PASSED", "smartctl_0027_i": "General SMART Values:", "smartctl_0028_i": "Offline data collection status:  (0x82)\tOffline data collection activity", "smartctl_0029_i": "\t\t\t\t\twas completed without error.", "smartctl_0030_u": "\t\t\t\t\tAuto Offline Data Collection: Enabled.", "smartctl_0031_i": "Self-test execution status:      (   0)\tThe previous self-test routine completed", "smartctl_0032_i": "\t\t\t\t\twithout error or no self-test has ever ", "smartctl_0033_i": "\t\t\t\t\tbeen run.", "smartctl_0034_i": "Total time to complete Offline ", "smartctl_0035_i": "data collection: \t\t(  288) seconds.", "smartctl_0036_i": "Offline data collection", "smartctl_0037_i": "capabilities: \t\t\t (0x19) SMART execute Offline immediate.", "smartctl_0038_u": "\t\t\t\t\tNo Auto Offline data collection support.", "smartctl_0039_i": "\t\t\t\t\tSuspend Offline collection upon new", "smartctl_0040_i": "\t\t\t\t\tcommand.", "smartctl_0041_i": "\t\t\t\t\tOffline surface scan supported.", "smartctl_0042_i": "\t\t\t\t\tSelf-test supported.", "smartctl_0043_i": "\t\t\t\t\tNo Conveyance Self-test supported.", "smartctl_0044_i": "\t\t\t\t\tNo Selective Self-test supported.", "smartctl_0045_i": "SMART capabilities:            (0x0003)\tSaves SMART data before entering", "smartctl_0046_i": "\t\t\t\t\tpower-saving mode.", "smartctl_0047_u": "\t\t\t\t\tSupports SMART auto save timer.", "smartctl_0048_i": "Error logging capability:        (0x01)\tError logging supported.", "smartctl_0049_i": "\t\t\t\t\tNo General Purpose Logging support.", "smartctl_0050_i": "Short self-test routine ", "smartctl_0051_i": "recommended polling time: \t (   2) minutes.", "smartctl_0052_i": "Extended self-test routine", "smartctl_0053_i": "recommended polling time: \t (  54) minutes.", "smartctl_0055_i": "SMART Attributes Data Structure revision number: 1", "smartctl_0056_i": "Vendor Specific SMART Attributes with Thresholds:", "smartctl_0057_i": "ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE", "smartctl_0058_i": "  1 Raw_Read_Error_Rate     PO----   100   100   006    -    0", "smartctl_0059_i": "  3 Spin_Up_Time            PO----   100   100   000    -    16", "smartctl_0060_i": "  4 Start_Stop_Count        -O----   100   100   020    -    100", "smartctl_0061_i": "  5 Reallocated_Sector_Ct   PO----   100   100   036    -    0", "smartctl_0062_i": "  9 Power_On_Hours          PO----   100   100   000    -    1", "smartctl_0063_i": " 12 Power_Cycle_Count       PO----   100   100   000    -    0", "smartctl_0064_i": "190 Airflow_Temperature_Cel PO----   069   069   050    -    31 (Min/Max 31/31)", "smartctl_0065_i": "                            ||||||_ K auto-keep", "smartctl_0066_i": "                            |||||__ C event count", "smartctl_0067_i": "                            ||||___ R error rate", "smartctl_0068_i": "                            |||____ S speed/performance", "smartctl_0069_i": "                            ||_____ O updated online", "smartctl_0070_i": "                            |______ P prefailure warning", "smartctl_0072_u": "Read SMART Log Directory failed: scsi error badly formed scsi parameters", "smartctl_0074_u": "General Purpose Log Directory not supported", "smartctl_0076_u": "SMART Extended Comprehensive Error Log (GP Log 0x03) not supported", "smartctl_0078_i": "SMART Error Log Version: 1", "smartctl_0079_i": "No Errors Logged", "smartctl_0081_u": "SMART Extended Self-test Log (GP Log 0x07) not supported", "smartctl_0083_i": "SMART Self-test log structure revision number 1", "smartctl_0084_i": "No self-tests have been logged.  [To run self-tests, use: smartctl -t]", "smartctl_0086_u": "Selective Self-tests/Logging not supported", "smartctl_0088_u": "SCT Commands not supported", "smartctl_0090_u": "Device Statistics (GP/SMART Log 0x04) not supported", "smartctl_0092_u": "Pending Defects log (GP Log 0x0c) not supported", "smartctl_0094_u": "SATA Phy Event Counters (GP Log 0x11) not supported", "temperature": {"current": 31}, "trim": {"deterministic": true, "supported": true, "zeroed": false}, "user_capacity": {"blocks": 83886081, "blocks_s": "83886081", "bytes": 42949673472, "bytes_s": "42949673472"}, "write_cache": {"enabled": true}}]}}