1179 lines
67 KiB
JSON
1179 lines
67 KiB
JSON
{
|
|
"timestamp": "2022-04-01 06:28:54.099394",
|
|
"type": "Snapshot",
|
|
"uuid": "232b44f3-b139-490e-90c8-2748a4523e80",
|
|
"wbid": "YKPZ27NJ2NMRO4893M4L5NRZV5YJ1",
|
|
"software": "Workbench",
|
|
"version": "2022.03.00",
|
|
"schema_version": "V1",
|
|
"data": {
|
|
"lshw": {
|
|
"id": "wb",
|
|
"class": "system",
|
|
"claimed": true,
|
|
"handle": "DMI:0100",
|
|
"description": "Computer",
|
|
"product": "Standard PC (i440FX + PIIX, 1996)",
|
|
"vendor": "QEMU",
|
|
"version": "pc-i440fx-5.2",
|
|
"width": 64,
|
|
"configuration": {
|
|
"boot": "normal"
|
|
},
|
|
"capabilities": {
|
|
"smbios-2.8": "SMBIOS version 2.8",
|
|
"dmi-2.8": "DMI version 2.8",
|
|
"vsyscall32": "32-bit processes"
|
|
},
|
|
"children": [
|
|
{
|
|
"id": "core",
|
|
"class": "bus",
|
|
"claimed": true,
|
|
"description": "Motherboard",
|
|
"physid": "0",
|
|
"children": [
|
|
{
|
|
"id": "firmware",
|
|
"class": "memory",
|
|
"claimed": true,
|
|
"description": "BIOS",
|
|
"vendor": "SeaBIOS",
|
|
"physid": "0",
|
|
"version": "?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31",
|
|
"date": "04/01/2014",
|
|
"units": "bytes",
|
|
"size": 98304
|
|
},
|
|
{
|
|
"id": "cpu",
|
|
"class": "processor",
|
|
"claimed": true,
|
|
"handle": "DMI:0400",
|
|
"description": "CPU",
|
|
"product": "Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz",
|
|
"vendor": "Intel Corp.",
|
|
"physid": "400",
|
|
"businfo": "cpu@0",
|
|
"version": "6.142.9",
|
|
"slot": "CPU 0",
|
|
"units": "Hz",
|
|
"size": 2000000000,
|
|
"capacity": 2000000000,
|
|
"width": 64,
|
|
"configuration": {
|
|
"cores": "1",
|
|
"enabledcores": "1",
|
|
"microcode": "1",
|
|
"threads": "1"
|
|
},
|
|
"capabilities": {
|
|
"fpu": "mathematical co-processor",
|
|
"fpu_exception": "FPU exceptions reporting",
|
|
"wp": true,
|
|
"vme": "virtual mode extensions",
|
|
"de": "debugging extensions",
|
|
"pse": "page size extensions",
|
|
"tsc": "time stamp counter",
|
|
"msr": "model-specific registers",
|
|
"pae": "4GB+ memory addressing (Physical Address Extension)",
|
|
"mce": "machine check exceptions",
|
|
"cx8": "compare and exchange 8-byte",
|
|
"apic": "on-chip advanced programmable interrupt controller (APIC)",
|
|
"sep": "fast system calls",
|
|
"mtrr": "memory type range registers",
|
|
"pge": "page global enable",
|
|
"mca": "machine check architecture",
|
|
"cmov": "conditional move instruction",
|
|
"pat": "page attribute table",
|
|
"pse36": "36-bit page size extensions",
|
|
"clflush": true,
|
|
"mmx": "multimedia extensions (MMX)",
|
|
"fxsr": "fast floating point save/restore",
|
|
"sse": "streaming SIMD extensions (SSE)",
|
|
"sse2": "streaming SIMD extensions (SSE2)",
|
|
"ss": "self-snoop",
|
|
"syscall": "fast system calls",
|
|
"nx": "no-execute bit (NX)",
|
|
"pdpe1gb": true,
|
|
"rdtscp": true,
|
|
"x86-64": "64bits extensions (x86-64)",
|
|
"constant_tsc": true,
|
|
"arch_perfmon": true,
|
|
"rep_good": true,
|
|
"nopl": true,
|
|
"xtopology": true,
|
|
"cpuid": true,
|
|
"tsc_known_freq": true,
|
|
"pni": true,
|
|
"pclmulqdq": true,
|
|
"vmx": true,
|
|
"ssse3": true,
|
|
"fma": true,
|
|
"cx16": true,
|
|
"pcid": true,
|
|
"sse4_1": true,
|
|
"sse4_2": true,
|
|
"x2apic": true,
|
|
"movbe": true,
|
|
"popcnt": true,
|
|
"tsc_deadline_timer": true,
|
|
"aes": true,
|
|
"xsave": true,
|
|
"avx": true,
|
|
"f16c": true,
|
|
"rdrand": true,
|
|
"hypervisor": true,
|
|
"lahf_lm": true,
|
|
"abm": true,
|
|
"3dnowprefetch": true,
|
|
"cpuid_fault": true,
|
|
"invpcid_single": true,
|
|
"pti": true,
|
|
"tpr_shadow": true,
|
|
"vnmi": true,
|
|
"flexpriority": true,
|
|
"ept": true,
|
|
"vpid": true,
|
|
"ept_ad": true,
|
|
"fsgsbase": true,
|
|
"tsc_adjust": true,
|
|
"bmi1": true,
|
|
"avx2": true,
|
|
"smep": true,
|
|
"bmi2": true,
|
|
"erms": true,
|
|
"invpcid": true,
|
|
"mpx": true,
|
|
"rdseed": true,
|
|
"adx": true,
|
|
"smap": true,
|
|
"clflushopt": true,
|
|
"xsaveopt": true,
|
|
"xsavec": true,
|
|
"xgetbv1": true,
|
|
"xsaves": true,
|
|
"arat": true,
|
|
"umip": true,
|
|
"arch_capabilities": true
|
|
}
|
|
},
|
|
{
|
|
"id": "memory",
|
|
"class": "memory",
|
|
"claimed": true,
|
|
"handle": "DMI:1000",
|
|
"description": "System Memory",
|
|
"physid": "1000",
|
|
"units": "bytes",
|
|
"size": 4294967296,
|
|
"configuration": {
|
|
"errordetection": "multi-bit-ecc"
|
|
},
|
|
"capabilities": {
|
|
"ecc": "Multi-bit error-correcting code (ECC)"
|
|
},
|
|
"children": [
|
|
{
|
|
"id": "bank",
|
|
"class": "memory",
|
|
"claimed": true,
|
|
"handle": "DMI:1100",
|
|
"description": "DIMM RAM",
|
|
"vendor": "QEMU",
|
|
"physid": "0",
|
|
"slot": "DIMM 0",
|
|
"units": "bytes",
|
|
"size": 4294967296
|
|
}
|
|
]
|
|
},
|
|
{
|
|
"id": "pci",
|
|
"class": "bridge",
|
|
"claimed": true,
|
|
"handle": "PCIBUS:0000:00",
|
|
"description": "Host bridge",
|
|
"product": "440FX - 82441FX PMC [Natoma]",
|
|
"vendor": "Intel Corporation",
|
|
"physid": "100",
|
|
"businfo": "pci@0000:00:00.0",
|
|
"version": "02",
|
|
"width": 32,
|
|
"clock": 33000000,
|
|
"children": [
|
|
{
|
|
"id": "isa",
|
|
"class": "bridge",
|
|
"claimed": true,
|
|
"handle": "PCI:0000:00:01.0",
|
|
"description": "ISA bridge",
|
|
"product": "82371SB PIIX3 ISA [Natoma/Triton II]",
|
|
"vendor": "Intel Corporation",
|
|
"physid": "1",
|
|
"businfo": "pci@0000:00:01.0",
|
|
"version": "00",
|
|
"width": 32,
|
|
"clock": 33000000,
|
|
"configuration": {
|
|
"latency": "0"
|
|
},
|
|
"capabilities": {
|
|
"isa": true
|
|
},
|
|
"children": [
|
|
{
|
|
"id": "pnp00:00",
|
|
"class": "input",
|
|
"claimed": true,
|
|
"product": "PnP device PNP0303",
|
|
"physid": "0",
|
|
"configuration": {
|
|
"driver": "i8042 kbd"
|
|
},
|
|
"capabilities": {
|
|
"pnp": true
|
|
}
|
|
},
|
|
{
|
|
"id": "pnp00:01",
|
|
"class": "input",
|
|
"claimed": true,
|
|
"product": "PnP device PNP0f13",
|
|
"physid": "1",
|
|
"configuration": {
|
|
"driver": "i8042 aux"
|
|
},
|
|
"capabilities": {
|
|
"pnp": true
|
|
}
|
|
},
|
|
{
|
|
"id": "pnp00:02",
|
|
"class": "storage",
|
|
"claimed": true,
|
|
"product": "PnP device PNP0700",
|
|
"physid": "2",
|
|
"capabilities": {
|
|
"pnp": true
|
|
}
|
|
},
|
|
{
|
|
"id": "pnp00:03",
|
|
"class": "printer",
|
|
"claimed": true,
|
|
"product": "PnP device PNP0400",
|
|
"physid": "3",
|
|
"configuration": {
|
|
"driver": "parport_pc"
|
|
},
|
|
"capabilities": {
|
|
"pnp": true
|
|
}
|
|
},
|
|
{
|
|
"id": "pnp00:04",
|
|
"class": "communication",
|
|
"claimed": true,
|
|
"product": "PnP device PNP0501",
|
|
"physid": "4",
|
|
"configuration": {
|
|
"driver": "serial"
|
|
},
|
|
"capabilities": {
|
|
"pnp": true
|
|
}
|
|
},
|
|
{
|
|
"id": "pnp00:05",
|
|
"class": "system",
|
|
"claimed": true,
|
|
"product": "PnP device PNP0b00",
|
|
"physid": "5",
|
|
"configuration": {
|
|
"driver": "rtc_cmos"
|
|
},
|
|
"capabilities": {
|
|
"pnp": true
|
|
}
|
|
}
|
|
]
|
|
},
|
|
{
|
|
"id": "ide",
|
|
"class": "storage",
|
|
"claimed": true,
|
|
"handle": "PCI:0000:00:01.1",
|
|
"description": "IDE interface",
|
|
"product": "82371SB PIIX3 IDE [Natoma/Triton II]",
|
|
"vendor": "Intel Corporation",
|
|
"physid": "1.1",
|
|
"businfo": "pci@0000:00:01.1",
|
|
"logicalname": [
|
|
"scsi0",
|
|
"scsi1"
|
|
],
|
|
"version": "00",
|
|
"width": 32,
|
|
"clock": 33000000,
|
|
"configuration": {
|
|
"driver": "ata_piix",
|
|
"latency": "0"
|
|
},
|
|
"capabilities": {
|
|
"ide": true,
|
|
"isa_compat_mode": "ISA compatibility mode",
|
|
"bus_master": "bus mastering",
|
|
"emulated": "Emulated device"
|
|
},
|
|
"children": [
|
|
{
|
|
"id": "disk",
|
|
"class": "disk",
|
|
"claimed": true,
|
|
"handle": "SCSI:00:00:00:00",
|
|
"description": "ATA Disk",
|
|
"product": "QEMU HARDDISK",
|
|
"physid": "0",
|
|
"businfo": "scsi@0:0.0.0",
|
|
"logicalname": "/dev/sda",
|
|
"dev": "8:0",
|
|
"version": "2.5+",
|
|
"serial": "QM00001",
|
|
"units": "bytes",
|
|
"size": 42949673472,
|
|
"configuration": {
|
|
"ansiversion": "5",
|
|
"logicalsectorsize": "512",
|
|
"sectorsize": "512",
|
|
"signature": "c338ebd4"
|
|
},
|
|
"capabilities": {
|
|
"partitioned": "Partitioned disk",
|
|
"partitioned:dos": "MS-DOS partition table"
|
|
},
|
|
"children": [
|
|
{
|
|
"id": "volume:0",
|
|
"class": "volume",
|
|
"claimed": true,
|
|
"description": "EXT4 volume",
|
|
"vendor": "Linux",
|
|
"physid": "1",
|
|
"businfo": "scsi@0:0.0.0,1",
|
|
"logicalname": "/dev/sda1",
|
|
"dev": "8:1",
|
|
"version": "1.0",
|
|
"serial": "666140b3-42b9-4940-8d82-7d894261231f",
|
|
"size": 4293918720,
|
|
"capacity": 4293918720,
|
|
"configuration": {
|
|
"created": "2020-09-18 14:01:52",
|
|
"filesystem": "ext4",
|
|
"lastmountpoint": "/",
|
|
"modified": "2022-01-29 15:42:10",
|
|
"mounted": "2022-01-29 15:42:10",
|
|
"state": "clean"
|
|
},
|
|
"capabilities": {
|
|
"primary": "Primary partition",
|
|
"bootable": "Bootable partition (active)",
|
|
"journaled": true,
|
|
"extended_attributes": "Extended Attributes",
|
|
"large_files": "4GB+ files",
|
|
"huge_files": "16TB+ files",
|
|
"dir_nlink": "directories with 65000+ subdirs",
|
|
"recover": "needs recovery",
|
|
"64bit": "64bit filesystem",
|
|
"extents": "extent-based allocation",
|
|
"ext4": true,
|
|
"ext2": "EXT2/EXT3",
|
|
"initialized": "initialized volume"
|
|
}
|
|
},
|
|
{
|
|
"id": "volume:1",
|
|
"class": "volume",
|
|
"claimed": true,
|
|
"description": "Extended partition",
|
|
"physid": "2",
|
|
"businfo": "scsi@0:0.0.0,2",
|
|
"logicalname": "/dev/sda2",
|
|
"dev": "8:2",
|
|
"size": 38652609536,
|
|
"capacity": 38652609536,
|
|
"capabilities": {
|
|
"primary": "Primary partition",
|
|
"extended": "Extended partition",
|
|
"partitioned": "Partitioned disk",
|
|
"partitioned:extended": "Extended partition"
|
|
},
|
|
"children": [
|
|
{
|
|
"id": "logicalvolume:0",
|
|
"class": "volume",
|
|
"claimed": true,
|
|
"description": "Linux swap volume",
|
|
"physid": "5",
|
|
"logicalname": "/dev/sda5",
|
|
"dev": "8:5",
|
|
"version": "1",
|
|
"serial": "5149082d-e5ab-4ccb-b75d-52a8b4da4fc8",
|
|
"size": 4292870144,
|
|
"capacity": 4292870144,
|
|
"configuration": {
|
|
"filesystem": "swap",
|
|
"pagesize": "4096"
|
|
},
|
|
"capabilities": {
|
|
"nofs": "No filesystem",
|
|
"swap": "Linux swap",
|
|
"initialized": "initialized volume"
|
|
}
|
|
},
|
|
{
|
|
"id": "logicalvolume:1",
|
|
"class": "volume",
|
|
"claimed": true,
|
|
"description": "EXT4 volume",
|
|
"vendor": "Linux",
|
|
"physid": "6",
|
|
"logicalname": [
|
|
"/dev/sda6",
|
|
"/"
|
|
],
|
|
"dev": "8:6",
|
|
"version": "1.0",
|
|
"serial": "cc4fd343-e6f4-4376-937e-f5d2fbcb48c7",
|
|
"size": 34358689792,
|
|
"capacity": 34358689792,
|
|
"configuration": {
|
|
"created": "2022-04-01 05:25:42",
|
|
"filesystem": "ext4",
|
|
"lastmountpoint": "/",
|
|
"modified": "2022-04-01 05:27:52",
|
|
"mount.fstype": "ext4",
|
|
"mount.options": "rw,relatime,errors=remount-ro",
|
|
"mounted": "2022-04-01 05:27:52",
|
|
"state": "mounted"
|
|
},
|
|
"capabilities": {
|
|
"journaled": true,
|
|
"extended_attributes": "Extended Attributes",
|
|
"large_files": "4GB+ files",
|
|
"huge_files": "16TB+ files",
|
|
"dir_nlink": "directories with 65000+ subdirs",
|
|
"recover": "needs recovery",
|
|
"64bit": "64bit filesystem",
|
|
"extents": "extent-based allocation",
|
|
"ext4": true,
|
|
"ext2": "EXT2/EXT3",
|
|
"initialized": "initialized volume"
|
|
}
|
|
}
|
|
]
|
|
}
|
|
]
|
|
},
|
|
{
|
|
"id": "cdrom",
|
|
"class": "disk",
|
|
"claimed": true,
|
|
"handle": "SCSI:01:00:00:00",
|
|
"description": "DVD reader",
|
|
"product": "QEMU DVD-ROM",
|
|
"vendor": "QEMU",
|
|
"physid": "1",
|
|
"businfo": "scsi@1:0.0.0",
|
|
"logicalname": [
|
|
"/dev/cdrom",
|
|
"/dev/dvd",
|
|
"/dev/sr0"
|
|
],
|
|
"dev": "11:0",
|
|
"version": "2.5+",
|
|
"configuration": {
|
|
"ansiversion": "5",
|
|
"status": "nodisc"
|
|
},
|
|
"capabilities": {
|
|
"removable": "support is removable",
|
|
"audio": "Audio CD playback",
|
|
"dvd": "DVD playback"
|
|
}
|
|
}
|
|
]
|
|
},
|
|
{
|
|
"id": "bridge",
|
|
"class": "bridge",
|
|
"claimed": true,
|
|
"handle": "PCI:0000:00:01.3",
|
|
"description": "Bridge",
|
|
"product": "82371AB/EB/MB PIIX4 ACPI",
|
|
"vendor": "Intel Corporation",
|
|
"physid": "1.3",
|
|
"businfo": "pci@0000:00:01.3",
|
|
"version": "03",
|
|
"width": 32,
|
|
"clock": 33000000,
|
|
"configuration": {
|
|
"driver": "piix4_smbus",
|
|
"latency": "0"
|
|
},
|
|
"capabilities": {
|
|
"bridge": true
|
|
}
|
|
},
|
|
{
|
|
"id": "display",
|
|
"class": "display",
|
|
"claimed": true,
|
|
"handle": "PCI:0000:00:02.0",
|
|
"description": "VGA compatible controller",
|
|
"product": "bochs-drmdrmfb",
|
|
"physid": "2",
|
|
"businfo": "pci@0000:00:02.0",
|
|
"logicalname": "/dev/fb0",
|
|
"version": "02",
|
|
"width": 32,
|
|
"clock": 33000000,
|
|
"configuration": {
|
|
"depth": "32",
|
|
"driver": "bochs-drm",
|
|
"latency": "0",
|
|
"resolution": "1024,768"
|
|
},
|
|
"capabilities": {
|
|
"vga_controller": true,
|
|
"bus_master": "bus mastering",
|
|
"rom": "extension ROM",
|
|
"fb": "framebuffer"
|
|
}
|
|
},
|
|
{
|
|
"id": "network",
|
|
"class": "network",
|
|
"claimed": true,
|
|
"handle": "PCI:0000:00:03.0",
|
|
"description": "Ethernet interface",
|
|
"product": "82540EM Gigabit Ethernet Controller",
|
|
"vendor": "Intel Corporation",
|
|
"physid": "3",
|
|
"businfo": "pci@0000:00:03.0",
|
|
"logicalname": "ens3",
|
|
"version": "03",
|
|
"serial": "52:54:00:12:34:56",
|
|
"units": "bit/s",
|
|
"size": 1000000000,
|
|
"capacity": 1000000000,
|
|
"width": 32,
|
|
"clock": 33000000,
|
|
"configuration": {
|
|
"autonegotiation": "on",
|
|
"broadcast": "yes",
|
|
"driver": "e1000",
|
|
"driverversion": "5.10.0-13-amd64",
|
|
"duplex": "full",
|
|
"ip": "10.0.2.15",
|
|
"latency": "0",
|
|
"link": "yes",
|
|
"multicast": "yes",
|
|
"port": "twisted pair",
|
|
"speed": "1Gbit/s"
|
|
},
|
|
"capabilities": {
|
|
"bus_master": "bus mastering",
|
|
"rom": "extension ROM",
|
|
"ethernet": true,
|
|
"physical": "Physical interface",
|
|
"tp": "twisted pair",
|
|
"10bt": "10Mbit/s",
|
|
"10bt-fd": "10Mbit/s (full duplex)",
|
|
"100bt": "100Mbit/s",
|
|
"100bt-fd": "100Mbit/s (full duplex)",
|
|
"1000bt-fd": "1Gbit/s (full duplex)",
|
|
"autonegotiation": "Auto-negotiation"
|
|
}
|
|
}
|
|
]
|
|
}
|
|
]
|
|
},
|
|
{
|
|
"id": "input:0",
|
|
"class": "input",
|
|
"claimed": true,
|
|
"product": "AT Translated Set 2 keyboard",
|
|
"physid": "1",
|
|
"logicalname": [
|
|
"input0",
|
|
"/dev/input/event0",
|
|
"input0::capslock",
|
|
"input0::numlock",
|
|
"input0::scrolllock"
|
|
],
|
|
"capabilities": {
|
|
"i8042": "i8042 PC AT keyboard controller"
|
|
}
|
|
},
|
|
{
|
|
"id": "input:1",
|
|
"class": "input",
|
|
"claimed": true,
|
|
"product": "VirtualPS/2 VMware VMMouse",
|
|
"physid": "2",
|
|
"logicalname": [
|
|
"input2",
|
|
"/dev/input/event2",
|
|
"/dev/input/mouse1"
|
|
],
|
|
"capabilities": {
|
|
"i8042": "i8042 PC AT keyboard controller"
|
|
}
|
|
},
|
|
{
|
|
"id": "input:2",
|
|
"class": "input",
|
|
"claimed": true,
|
|
"product": "VirtualPS/2 VMware VMMouse",
|
|
"physid": "3",
|
|
"logicalname": [
|
|
"input3",
|
|
"/dev/input/event1",
|
|
"/dev/input/mouse0"
|
|
],
|
|
"capabilities": {
|
|
"i8042": "i8042 PC AT keyboard controller"
|
|
}
|
|
},
|
|
{
|
|
"id": "input:3",
|
|
"class": "input",
|
|
"claimed": true,
|
|
"product": "Power Button",
|
|
"physid": "4",
|
|
"logicalname": [
|
|
"input4",
|
|
"/dev/input/event3"
|
|
],
|
|
"capabilities": {
|
|
"platform": true
|
|
}
|
|
},
|
|
{
|
|
"id": "input:4",
|
|
"class": "input",
|
|
"claimed": true,
|
|
"product": "PC Speaker",
|
|
"physid": "5",
|
|
"logicalname": [
|
|
"input5",
|
|
"/dev/input/event4"
|
|
],
|
|
"capabilities": {
|
|
"isa": "ISA bus"
|
|
}
|
|
}
|
|
]
|
|
},
|
|
"dmidecode": "# dmidecode 3.3\nGetting SMBIOS data from sysfs.\nSMBIOS 2.8 present.\n10 structures occupying 462 bytes.\nTable at 0x000F5A90.\n\nHandle 0x0000, DMI type 0, 24 bytes\nBIOS Information\n\tVendor: SeaBIOS\n\tVersion: ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31\n\tRelease Date: 04/01/2014\n\tAddress: 0xE8000\n\tRuntime Size: 96 kB\n\tROM Size: 64 kB\n\tCharacteristics:\n\t\tBIOS characteristics not supported\n\t\tTargeted content distribution is supported\n\tBIOS Revision: 0.0\n\nHandle 0x0100, DMI type 1, 27 bytes\nSystem Information\n\tManufacturer: QEMU\n\tProduct Name: Standard PC (i440FX + PIIX, 1996)\n\tVersion: pc-i440fx-5.2\n\tSerial Number: Not Specified\n\tUUID: Not Settable\n\tWake-up Type: Power Switch\n\tSKU Number: Not Specified\n\tFamily: Not Specified\n\nHandle 0x0300, DMI type 3, 22 bytes\nChassis Information\n\tManufacturer: QEMU\n\tType: Other\n\tLock: Not Present\n\tVersion: pc-i440fx-5.2\n\tSerial Number: Not Specified\n\tAsset Tag: Not Specified\n\tBoot-up State: Safe\n\tPower Supply State: Safe\n\tThermal State: Safe\n\tSecurity Status: Unknown\n\tOEM Information: 0x00000000\n\tHeight: Unspecified\n\tNumber Of Power Cords: Unspecified\n\tContained Elements: 0\n\tSKU Number: Not Specified\n\nHandle 0x0400, DMI type 4, 42 bytes\nProcessor Information\n\tSocket Designation: CPU 0\n\tType: Central Processor\n\tFamily: Other\n\tManufacturer: QEMU\n\tID: E9 06 08 00 FF FB 8B 0F\n\tVersion: pc-i440fx-5.2\n\tVoltage: Unknown\n\tExternal Clock: Unknown\n\tMax Speed: 2000 MHz\n\tCurrent Speed: 2000 MHz\n\tStatus: Populated, Enabled\n\tUpgrade: Other\n\tL1 Cache Handle: Not Provided\n\tL2 Cache Handle: Not Provided\n\tL3 Cache Handle: Not Provided\n\tSerial Number: Not Specified\n\tAsset Tag: Not Specified\n\tPart Number: Not Specified\n\tCore Count: 1\n\tCore Enabled: 1\n\tThread Count: 1\n\tCharacteristics: None\n\nHandle 0x1000, DMI type 16, 23 bytes\nPhysical Memory Array\n\tLocation: Other\n\tUse: System Memory\n\tError Correction Type: Multi-bit ECC\n\tMaximum Capacity: 4 GB\n\tError Information Handle: Not Provided\n\tNumber Of Devices: 1\n\nHandle 0x1100, DMI type 17, 40 bytes\nMemory Device\n\tArray Handle: 0x1000\n\tError Information Handle: Not Provided\n\tTotal Width: Unknown\n\tData Width: Unknown\n\tSize: 4 GB\n\tForm Factor: DIMM\n\tSet: None\n\tLocator: DIMM 0\n\tBank Locator: Not Specified\n\tType: RAM\n\tType Detail: Other\n\tSpeed: Unknown\n\tManufacturer: QEMU\n\tSerial Number: Not Specified\n\tAsset Tag: Not Specified\n\tPart Number: Not Specified\n\tRank: Unknown\n\tConfigured Memory Speed: Unknown\n\tMinimum Voltage: Unknown\n\tMaximum Voltage: Unknown\n\tConfigured Voltage: Unknown\n\nHandle 0x1300, DMI type 19, 31 bytes\nMemory Array Mapped Address\n\tStarting Address: 0x00000000000\n\tEnding Address: 0x000BFFFFFFF\n\tRange Size: 3 GB\n\tPhysical Array Handle: 0x1000\n\tPartition Width: 1\n\nHandle 0x1301, DMI type 19, 31 bytes\nMemory Array Mapped Address\n\tStarting Address: 0x00100000000\n\tEnding Address: 0x0013FFFFFFF\n\tRange Size: 1 GB\n\tPhysical Array Handle: 0x1000\n\tPartition Width: 1\n\nHandle 0x2000, DMI type 32, 11 bytes\nSystem Boot Information\n\tStatus: No errors detected\n\nHandle 0x7F00, DMI type 127, 4 bytes\nEnd Of Table\n\n",
|
|
"hwinfo": "01: None 00.0: 0102 Floppy disk controller\n [Created at floppy.112]\n Unique ID: rdCR.3wRL2_g4d2B\n Hardware Class: storage\n Model: \"Floppy disk controller\"\n I/O Port: 0x3f2 (rw)\n I/O Ports: 0x3f4-0x3f5 (rw)\n I/O Port: 0x3f7 (rw)\n DMA: 2\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n02: Floppy 00.0: 10603 Floppy Disk\n [Created at floppy.127]\n Unique ID: sPPV.oZ89vuho4Y3\n Parent ID: rdCR.3wRL2_g4d2B\n Hardware Class: floppy\n Model: \"Floppy Disk\"\n Device File: /dev/fd0\n Size: 3.5 ''\n Size: 5760 sectors a 512 bytes\n Capacity: 0 GB (2949120 bytes)\n Drive status: no medium\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n Attached to: #1 (Floppy disk controller)\n\n03: None 00.0: 10105 BIOS\n [Created at bios.186]\n Unique ID: rdCR.lZF+r4EgHp4\n Hardware Class: bios\n BIOS Keyboard LED Status:\n Scroll Lock: off\n Num Lock: off\n Caps Lock: off\n Serial Port 0: 0x3f8\n Parallel Port 0: 0x378\n Base Memory: 639 kB\n PnP BIOS: @@@0000\n MP spec rev 1.4 info:\n OEM id: \"BOCHSCPU\"\n Product id: \"0.1\"\n 1 CPUs (0 disabled)\n BIOS32 Service Directory Entry: 0xfd243\n SMBIOS Version: 2.8\n BIOS Info: #0\n Vendor: \"SeaBIOS\"\n Version: \"?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31\"\n Date: \"04/01/2014\"\n Start Address: 0xe8000\n ROM Size: 64 kB\n Features: 0x04000000000000000008\n System Info: #256\n Manufacturer: \"QEMU\"\n Product: \"Standard PC (i440FX + PIIX, 1996)\"\n Version: \"pc-i440fx-5.2\"\n UUID: undefined\n Wake-up: 0x06 (Power Switch)\n Chassis Info: #768\n Manufacturer: \"QEMU\"\n Version: \"pc-i440fx-5.2\"\n Type: 0x01 (Other)\n Bootup State: 0x03 (Safe)\n Power Supply State: 0x03 (Safe)\n Thermal State: 0x03 (Safe)\n Security Status: 0x02 (Unknown)\n Processor Info: #1024\n Socket: \"CPU 0\"\n Socket Type: 0x01 (Other)\n Socket Status: Populated\n Type: 0x03 (CPU)\n Family: 0x01 (Other)\n Manufacturer: \"QEMU\"\n Version: \"pc-i440fx-5.2\"\n Processor ID: 0x0f8bfbff000806e9\n Status: 0x01 (Enabled)\n Max. Speed: 2000 MHz\n Current Speed: 2000 MHz\n Physical Memory Array: #4096\n Use: 0x03 (System memory)\n Location: 0x01 (Other)\n Slots: 1\n Max. Size: 4 GB\n ECC: 0x06 (Multi-bit)\n Memory Device: #4352\n Location: \"DIMM 0\"\n Manufacturer: \"QEMU\"\n Memory Array: #4096\n Form Factor: 0x09 (DIMM)\n Type: 0x07 (RAM)\n Type Detail: 0x0002 (Other)\n Data Width: 0 bits\n Size: 4 GB\n Memory Array Mapping: #4864\n Memory Array: #4096\n Partition Width: 1\n Start Address: 0x00000000\n End Address: 0xc0000000\n Memory Array Mapping: #4865\n Memory Array: #4096\n Partition Width: 1\n Start Address: 0x0000000100000000\n End Address: 0x0000000140000000\n Type 32 Record: #8192\n Data 00: 20 0b 00 20 00 00 00 00 00 00 00\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n04: None 00.0: 10107 System\n [Created at sys.64]\n Unique ID: rdCR.n_7QNeEnh23\n Hardware Class: system\n Model: \"System\"\n Formfactor: \"desktop\"\n Driver Info #0:\n Driver Status: thermal,fan are not active\n Driver Activation Cmd: \"modprobe thermal; modprobe fan\"\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n05: None 00.0: 10104 FPU\n [Created at misc.191]\n Unique ID: rdCR.EMpH5pjcahD\n Hardware Class: unknown\n Model: \"FPU\"\n I/O Ports: 0xf0-0xff (rw)\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n06: None 00.0: 0801 DMA controller (8237)\n [Created at misc.205]\n Unique ID: rdCR.f5u1ucRm+H9\n Hardware Class: unknown\n Model: \"DMA controller\"\n I/O Ports: 0x00-0xcf7 (rw)\n I/O Ports: 0xc0-0xdf (rw)\n I/O Ports: 0x80-0x8f (rw)\n DMA: 4\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n07: None 00.0: 0800 PIC (8259)\n [Created at misc.218]\n Unique ID: rdCR.8uRK7LxiIA2\n Hardware Class: unknown\n Model: \"PIC\"\n I/O Ports: 0x20-0x21 (rw)\n I/O Ports: 0xa0-0xa1 (rw)\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n08: None 00.0: 0900 Keyboard controller\n [Created at misc.250]\n Unique ID: rdCR.9N+EecqykME\n Hardware Class: unknown\n Model: \"Keyboard controller\"\n I/O Port: 0x60 (rw)\n I/O Port: 0x64 (rw)\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n09: None 00.0: 0701 Parallel controller (SPP)\n [Created at misc.261]\n Unique ID: YMnp.ecK7NLYWZ5D\n Hardware Class: unknown\n Model: \"Parallel controller\"\n Device File: /dev/lp0\n I/O Ports: 0x378-0x37a (rw)\n I/O Ports: 0x37b-0x37f (rw)\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n10: None 00.0: 10400 PS/2 Controller\n [Created at misc.303]\n Unique ID: rdCR.DziBbWO85o5\n Hardware Class: unknown\n Model: \"PS/2 Controller\"\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n12: None 00.0: 10102 Main Memory\n [Created at memory.74]\n Unique ID: rdCR.CxwsZFjVASF\n Hardware Class: memory\n Model: \"Main Memory\"\n Memory Range: 0x00000000-0xf5b80fff (rw)\n Memory Size: 3 GB + 768 MB\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n13: PCI 01.0: 0601 ISA bridge\n [Created at pci.386]\n Unique ID: vSkL.ucdhKwLeeAA\n SysFS ID: /devices/pci0000:00/0000:00:01.0\n SysFS BusID: 0000:00:01.0\n Hardware Class: bridge\n Model: \"Red Hat Qemu virtual machine\"\n Vendor: pci 0x8086 \"Intel Corporation\"\n Device: pci 0x7000 \"82371SB PIIX3 ISA [Natoma/Triton II]\"\n SubVendor: pci 0x1af4 \"Red Hat, Inc.\"\n SubDevice: pci 0x1100 \"Qemu virtual machine\"\n Module Alias: \"pci:v00008086d00007000sv00001AF4sd00001100bc06sc01i00\"\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n14: PCI 00.0: 0600 Host bridge\n [Created at pci.386]\n Unique ID: qLht.YeL3TKDjrxE\n SysFS ID: /devices/pci0000:00/0000:00:00.0\n SysFS BusID: 0000:00:00.0\n Hardware Class: bridge\n Model: \"Red Hat Qemu virtual machine\"\n Vendor: pci 0x8086 \"Intel Corporation\"\n Device: pci 0x1237 \"440FX - 82441FX PMC [Natoma]\"\n SubVendor: pci 0x1af4 \"Red Hat, Inc.\"\n SubDevice: pci 0x1100 \"Qemu virtual machine\"\n Revision: 0x02\n Module Alias: \"pci:v00008086d00001237sv00001AF4sd00001100bc06sc00i00\"\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n15: PCI 01.3: 0680 Bridge\n [Created at pci.386]\n Unique ID: VRCs.M9Cc8lcQjE2\n SysFS ID: /devices/pci0000:00/0000:00:01.3\n SysFS BusID: 0000:00:01.3\n Hardware Class: bridge\n Model: \"Red Hat Qemu virtual machine\"\n Vendor: pci 0x8086 \"Intel Corporation\"\n Device: pci 0x7113 \"82371AB/EB/MB PIIX4 ACPI\"\n SubVendor: pci 0x1af4 \"Red Hat, Inc.\"\n SubDevice: pci 0x1100 \"Qemu virtual machine\"\n Revision: 0x03\n Driver: \"piix4_smbus\"\n Driver Modules: \"i2c_piix4\"\n IRQ: 9 (no events)\n Module Alias: \"pci:v00008086d00007113sv00001AF4sd00001100bc06sc80i00\"\n Driver Info #0:\n Driver Status: i2c_piix4 is active\n Driver Activation Cmd: \"modprobe i2c_piix4\"\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n16: PCI 03.0: 0200 Ethernet controller\n [Created at pci.386]\n Unique ID: RNcY.amjFVOTKCI8\n SysFS ID: /devices/pci0000:00/0000:00:03.0\n SysFS BusID: 0000:00:03.0\n Hardware Class: network\n Model: \"Red Hat QEMU Virtual Machine\"\n Vendor: pci 0x8086 \"Intel Corporation\"\n Device: pci 0x100e \"82540EM Gigabit Ethernet Controller\"\n SubVendor: pci 0x1af4 \"Red Hat, Inc.\"\n SubDevice: pci 0x1100 \"QEMU Virtual Machine\"\n Revision: 0x03\n Driver: \"e1000\"\n Driver Modules: \"e1000\"\n Device File: ens3\n Memory Range: 0xfebc0000-0xfebdffff (rw,non-prefetchable)\n I/O Ports: 0xc000-0xc03f (rw)\n Memory Range: 0xfeb80000-0xfebbffff (ro,non-prefetchable,disabled)\n IRQ: 11 (81544 events)\n HW Address: 52:54:00:12:34:56\n Permanent HW Address: 52:54:00:12:34:56\n Link detected: yes\n Module Alias: \"pci:v00008086d0000100Esv00001AF4sd00001100bc02sc00i00\"\n Driver Info #0:\n Driver Status: e1000 is active\n Driver Activation Cmd: \"modprobe e1000\"\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n17: PCI 01.1: 0101 IDE interface (ISA Compatibility mode-only controller, supports bus mastering)\n [Created at pci.386]\n Unique ID: mnDB.3sKqaxiizg6\n SysFS ID: /devices/pci0000:00/0000:00:01.1\n SysFS BusID: 0000:00:01.1\n Hardware Class: storage\n Model: \"Red Hat Qemu virtual machine\"\n Vendor: pci 0x8086 \"Intel Corporation\"\n Device: pci 0x7010 \"82371SB PIIX3 IDE [Natoma/Triton II]\"\n SubVendor: pci 0x1af4 \"Red Hat, Inc.\"\n SubDevice: pci 0x1100 \"Qemu virtual machine\"\n Driver: \"ata_piix\"\n Driver Modules: \"ata_piix\"\n I/O Ports: 0x1f0-0x1f7 (rw)\n I/O Port: 0x3f6 (rw)\n I/O Ports: 0x170-0x177 (rw)\n I/O Port: 0x376 (rw)\n I/O Ports: 0xc040-0xc04f (rw)\n Module Alias: \"pci:v00008086d00007010sv00001AF4sd00001100bc01sc01i80\"\n Driver Info #0:\n Driver Status: ata_piix is active\n Driver Activation Cmd: \"modprobe ata_piix\"\n Driver Info #1:\n Driver Status: ata_generic is active\n Driver Activation Cmd: \"modprobe ata_generic\"\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n18: PCI 02.0: 0300 VGA compatible controller (VGA)\n [Created at pci.386]\n Unique ID: _Znp.WspiKb87LiA\n SysFS ID: /devices/pci0000:00/0000:00:02.0\n SysFS BusID: 0000:00:02.0\n Hardware Class: graphics card\n Model: \"VGA compatible controller\"\n Vendor: pci 0x1234 \n Device: pci 0x1111 \n SubVendor: pci 0x1af4 \"Red Hat, Inc.\"\n SubDevice: pci 0x1100 \n Revision: 0x02\n Driver: \"bochs-drm\"\n Driver Modules: \"bochs_drm\"\n Memory Range: 0xfd000000-0xfdffffff (ro,non-prefetchable)\n Memory Range: 0xfebf0000-0xfebf0fff (rw,non-prefetchable)\n Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)\n I/O Ports: 0x3c0-0x3df (rw)\n Module Alias: \"pci:v00001234d00001111sv00001AF4sd00001100bc03sc00i00\"\n Driver Info #0:\n Driver Status: bochs_drm is active\n Driver Activation Cmd: \"modprobe bochs_drm\"\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n19: None 00.0: 10002 LCD Monitor\n [Created at monitor.125]\n Unique ID: rdCR.AenZDShaZ_5\n Parent ID: _Znp.WspiKb87LiA\n Hardware Class: monitor\n Model: \"QEMU Monitor\"\n Vendor: RHT \n Device: eisa 0x1234 \"QEMU Monitor\"\n Resolution: 640x480@60Hz\n Resolution: 800x600@60Hz\n Resolution: 1024x768@60Hz\n Resolution: 2048x1152@60Hz\n Resolution: 1920x1080@60Hz\n Size: 260x195 mm\n Year of Manufacture: 2014\n Week of Manufacture: 42\n Detailed Timings #0:\n Resolution: 1024x768\n Horizontal: 1024 1280 1310 1382 (+256 +286 +358) -hsync\n Vertical: 768 771 774 794 (+3 +6 +26) -vsync\n Frequencies: 82.29 MHz, 59.54 kHz, 74.99 Hz\n Driver Info #0:\n Max. Resolution: 2048x1152\n Vert. Sync Range: 50-125 Hz\n Hor. Sync Range: 30-160 kHz\n Bandwidth: 82 MHz\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n Attached to: #18 (VGA compatible controller)\n\n20: None 00.0: 0700 Serial controller (16550)\n [Created at serial.74]\n Unique ID: S_Uw.3fyvFV+mbWD\n Hardware Class: unknown\n Model: \"16550A\"\n Device: \"16550A\"\n Device File: /dev/ttyS0\n I/O Ports: 0x3f8-0x3ff (rw)\n IRQ: 4 (56 events)\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n21: SCSI 100.0: 10602 CD-ROM (DVD)\n [Created at block.249]\n Unique ID: KD9E.53N0UD4ozwD\n Parent ID: mnDB.3sKqaxiizg6\n SysFS ID: /class/block/sr0\n SysFS BusID: 1:0:0:0\n SysFS Device Link: /devices/pci0000:00/0000:00:01.1/ata2/host1/target1:0:0/1:0:0:0\n Hardware Class: cdrom\n Model: \"QEMU DVD-ROM\"\n Vendor: \"QEMU\"\n Device: \"QEMU DVD-ROM\"\n Revision: \"2.5+\"\n Driver: \"ata_piix\", \"sr\"\n Driver Modules: \"ata_piix\", \"sr_mod\"\n Device File: /dev/sr0 (/dev/sg1)\n Device Files: /dev/sr0, /dev/cdrom, /dev/disk/by-id/ata-QEMU_DVD-ROM_QM00003, /dev/disk/by-path/pci-0000:00:01.1-ata-2, /dev/disk/by-path/pci-0000:00:01.1-ata-2.0, /dev/dvd\n Device Number: block 11:0 (char 21:1)\n Features: DVD, MRW, MRW-W\n Drive status: no medium\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n Attached to: #17 (IDE interface)\n Drive Speed: 4\n\n22: None 00.0: 10600 Disk\n [Created at block.245]\n Unique ID: kwWm.Fxp0d3BezAE\n SysFS ID: /class/block/fd0\n SysFS BusID: floppy.0\n SysFS Device Link: /devices/platform/floppy.0\n Hardware Class: disk\n Model: \"Disk\"\n Driver: \"floppy\"\n Driver Modules: \"floppy\"\n Device File: /dev/fd0\n Device Number: block 2:0\n Size: 8 sectors a 512 bytes\n Capacity: 0 GB (4096 bytes)\n Drive status: no medium\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n23: IDE 00.0: 10600 Disk\n [Created at block.245]\n Unique ID: 3OOL.W8iGvCekDp8\n Parent ID: mnDB.3sKqaxiizg6\n SysFS ID: /class/block/sda\n SysFS BusID: 0:0:0:0\n SysFS Device Link: /devices/pci0000:00/0000:00:01.1/ata1/host0/target0:0:0/0:0:0:0\n Hardware Class: disk\n Model: \"QEMU HARDDISK\"\n Vendor: \"QEMU\"\n Device: \"HARDDISK\"\n Revision: \"2.5+\"\n Serial ID: \"QM00001\"\n Driver: \"ata_piix\", \"sd\"\n Driver Modules: \"ata_piix\", \"sd_mod\"\n Device File: /dev/sda\n Device Files: /dev/sda, /dev/disk/by-path/pci-0000:00:01.1-ata-1.0, /dev/disk/by-path/pci-0000:00:01.1-ata-1, /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001\n Device Number: block 8:0-8:15\n Geometry (Logical): CHS 5221/255/63\n Size: 83886081 sectors a 512 bytes\n Capacity: 40 GB (42949673472 bytes)\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n Attached to: #17 (IDE interface)\n\n24: None 00.0: 11300 Partition\n [Created at block.434]\n Unique ID: bdUI.SE1wIdpsiiC\n Parent ID: 3OOL.W8iGvCekDp8\n SysFS ID: /class/block/sda/sda1\n Hardware Class: partition\n Model: \"Partition\"\n Device File: /dev/sda1\n Device Files: /dev/sda1, /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part1, /dev/disk/by-partuuid/c338ebd4-01, /dev/disk/by-path/pci-0000:00:01.1-ata-1-part1, /dev/disk/by-uuid/666140b3-42b9-4940-8d82-7d894261231f, /dev/disk/by-path/pci-0000:00:01.1-ata-1.0-part1\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n Attached to: #23 (Disk)\n\n25: None 00.0: 11300 Partition\n [Created at block.434]\n Unique ID: 2pkM.SE1wIdpsiiC\n Parent ID: 3OOL.W8iGvCekDp8\n SysFS ID: /class/block/sda/sda2\n Hardware Class: partition\n Model: \"Partition\"\n Device File: /dev/sda2\n Device Files: /dev/sda2, /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part2, /dev/disk/by-path/pci-0000:00:01.1-ata-1.0-part2, /dev/disk/by-path/pci-0000:00:01.1-ata-1-part2, /dev/disk/by-partuuid/c338ebd4-02\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n Attached to: #23 (Disk)\n\n26: None 00.0: 11300 Partition\n [Created at block.434]\n Unique ID: QLVZ.SE1wIdpsiiC\n Parent ID: 3OOL.W8iGvCekDp8\n SysFS ID: /class/block/sda/sda5\n Hardware Class: partition\n Model: \"Partition\"\n Device File: /dev/sda5\n Device Files: /dev/sda5, /dev/disk/by-partuuid/c338ebd4-05, /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part5, /dev/disk/by-path/pci-0000:00:01.1-ata-1-part5, /dev/disk/by-path/pci-0000:00:01.1-ata-1.0-part5, /dev/disk/by-uuid/5149082d-e5ab-4ccb-b75d-52a8b4da4fc8\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n Attached to: #23 (Disk)\n\n27: None 00.0: 11300 Partition\n [Created at block.434]\n Unique ID: tWld.SE1wIdpsiiC\n Parent ID: 3OOL.W8iGvCekDp8\n SysFS ID: /class/block/sda/sda6\n Hardware Class: partition\n Model: \"Partition\"\n Device File: /dev/sda6\n Device Files: /dev/sda6, /dev/disk/by-path/pci-0000:00:01.1-ata-1.0-part6, /dev/disk/by-path/pci-0000:00:01.1-ata-1-part6, /dev/disk/by-partuuid/c338ebd4-06, /dev/disk/by-uuid/cc4fd343-e6f4-4376-937e-f5d2fbcb48c7, /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part6\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n Attached to: #23 (Disk)\n\n28: PS/2 00.0: 10800 Keyboard\n [Created at input.226]\n Unique ID: nLyy.+49ps10DtUF\n Hardware Class: keyboard\n Model: \"AT Translated Set 2 keyboard\"\n Vendor: 0x0001 \n Device: 0x0001 \"AT Translated Set 2 keyboard\"\n Compatible to: int 0x0211 0x0001\n Device File: /dev/input/event0\n Device Files: /dev/input/event0, /dev/input/by-path/platform-i8042-serio-0-event-kbd\n Device Number: char 13:64\n Driver Info #0:\n XkbRules: xfree86\n XkbModel: pc104\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n29: PS/2 00.0: 10500 PS/2 Mouse\n [Created at input.249]\n Unique ID: AH6Q.mYF0pYoTCW7\n Hardware Class: mouse\n Model: \"VirtualPS/2 VMware VMMouse\"\n Vendor: 0x0002 \n Device: 0x0013 \"VirtualPS/2 VMware VMMouse\"\n Compatible to: int 0x0210 0x0003\n Device File: /dev/input/mice (/dev/input/mouse0)\n Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event1, /dev/input/by-path/platform-i8042-serio-1-mouse\n Device Number: char 13:63 (char 13:32)\n Driver Info #0:\n Buttons: 3\n Wheels: 0\n XFree86 Protocol: explorerps/2\n GPM Protocol: exps2\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n30: PS/2 00.0: 10500 PS/2 Mouse\n [Created at input.249]\n Unique ID: AH6Q.++hSeDccb2F\n Hardware Class: mouse\n Model: \"VirtualPS/2 VMware VMMouse\"\n Vendor: 0x0002 \n Device: 0x0013 \"VirtualPS/2 VMware VMMouse\"\n Compatible to: int 0x0210 0x0012\n Device File: /dev/input/mice (/dev/input/mouse1)\n Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event2, /dev/input/by-path/platform-i8042-serio-1-event-mouse\n Device Number: char 13:63 (char 13:33)\n Driver Info #0:\n Buttons: 2\n Wheels: 1\n XFree86 Protocol: explorerps/2\n GPM Protocol: exps2\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n31: None 00.0: 10103 CPU\n [Created at cpu.465]\n Unique ID: rdCR.j8NaKXDZtZ6\n Hardware Class: cpu\n Arch: X86-64\n Vendor: \"GenuineIntel\"\n Model: 6.142.9 \"Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz\"\n Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ss,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,rep_good,nopl,xtopology,cpuid,tsc_known_freq,pni,pclmulqdq,vmx,ssse3,fma,cx16,pcid,sse4_1,sse4_2,x2apic,movbe,popcnt,tsc_deadline_timer,aes,xsave,avx,f16c,rdrand,hypervisor,lahf_lm,abm,3dnowprefetch,cpuid_fault,invpcid_single,pti,tpr_shadow,vnmi,flexpriority,ept,vpid,ept_ad,fsgsbase,tsc_adjust,bmi1,avx2,smep,bmi2,erms,invpcid,mpx,rdseed,adx,smap,clflushopt,xsaveopt,xsavec,xgetbv1,xsaves,arat,umip,arch_capabilities\n Clock: 2904 MHz\n BogoMips: 5808.00\n Cache: 16384 kb\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n\n32: None 03.0: 10701 Ethernet\n [Created at net.126]\n Unique ID: U2Mp.ndpeucax6V1\n Parent ID: RNcY.amjFVOTKCI8\n SysFS ID: /class/net/ens3\n SysFS Device Link: /devices/pci0000:00/0000:00:03.0\n Hardware Class: network interface\n Model: \"Ethernet network interface\"\n Driver: \"e1000\"\n Driver Modules: \"e1000\"\n Device File: ens3\n HW Address: 52:54:00:12:34:56\n Permanent HW Address: 52:54:00:12:34:56\n Link detected: yes\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n Attached to: #16 (Ethernet controller)\n\n33: None 00.0: 10700 Loopback\n [Created at net.126]\n Unique ID: ZsBS.GQNx7L4uPNA\n SysFS ID: /class/net/lo\n Hardware Class: network interface\n Model: \"Loopback network interface\"\n Device File: lo\n Link detected: yes\n Config Status: cfg=new, avail=yes, need=no, active=unknown\n",
|
|
"smart": [
|
|
{
|
|
"json_format_version": [
|
|
1,
|
|
0
|
|
],
|
|
"smartctl": {
|
|
"argv": [
|
|
"smartctl",
|
|
"-x",
|
|
"--json=cosviu",
|
|
"/dev/fd0"
|
|
],
|
|
"build_info": "(local build)",
|
|
"exit_status": 1,
|
|
"messages": [
|
|
{
|
|
"severity": "error",
|
|
"string": "/dev/fd0: Unable to detect device type"
|
|
}
|
|
],
|
|
"output": [
|
|
"smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-13-amd64] (local build)",
|
|
"Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org",
|
|
"",
|
|
"/dev/fd0: Unable to detect device type",
|
|
"Please specify device type with the -d option.",
|
|
"",
|
|
"Use smartctl -h to get a usage summary",
|
|
""
|
|
],
|
|
"platform_info": "x86_64-linux-5.10.0-13-amd64",
|
|
"svn_revision": "5155",
|
|
"version": [
|
|
7,
|
|
2
|
|
]
|
|
},
|
|
"smartctl_0001_i": "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-13-amd64] (local build)",
|
|
"smartctl_0002_i": "Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org",
|
|
"smartctl_0004_i": "/dev/fd0: Unable to detect device type",
|
|
"smartctl_0005_u": "Please specify device type with the -d option.",
|
|
"smartctl_0007_u": "Use smartctl -h to get a usage summary"
|
|
},
|
|
{
|
|
"ata_smart_attributes": {
|
|
"revision": 1,
|
|
"table": [
|
|
{
|
|
"flags": {
|
|
"auto_keep": false,
|
|
"error_rate": false,
|
|
"event_count": false,
|
|
"performance": false,
|
|
"prefailure": true,
|
|
"string": "PO---- ",
|
|
"updated_online": true,
|
|
"value": 3
|
|
},
|
|
"id": 1,
|
|
"name": "Raw_Read_Error_Rate",
|
|
"raw": {
|
|
"string": "0",
|
|
"value": 0
|
|
},
|
|
"thresh": 6,
|
|
"value": 100,
|
|
"when_failed": "",
|
|
"worst": 100
|
|
},
|
|
{
|
|
"flags": {
|
|
"auto_keep": false,
|
|
"error_rate": false,
|
|
"event_count": false,
|
|
"performance": false,
|
|
"prefailure": true,
|
|
"string": "PO---- ",
|
|
"updated_online": true,
|
|
"value": 3
|
|
},
|
|
"id": 3,
|
|
"name": "Spin_Up_Time",
|
|
"raw": {
|
|
"string": "16",
|
|
"value": 16
|
|
},
|
|
"thresh": 0,
|
|
"value": 100,
|
|
"when_failed": "",
|
|
"worst": 100
|
|
},
|
|
{
|
|
"flags": {
|
|
"auto_keep": false,
|
|
"error_rate": false,
|
|
"event_count": false,
|
|
"performance": false,
|
|
"prefailure": false,
|
|
"string": "-O---- ",
|
|
"updated_online": true,
|
|
"value": 2
|
|
},
|
|
"id": 4,
|
|
"name": "Start_Stop_Count",
|
|
"raw": {
|
|
"string": "100",
|
|
"value": 100
|
|
},
|
|
"thresh": 20,
|
|
"value": 100,
|
|
"when_failed": "",
|
|
"worst": 100
|
|
},
|
|
{
|
|
"flags": {
|
|
"auto_keep": false,
|
|
"error_rate": false,
|
|
"event_count": false,
|
|
"performance": false,
|
|
"prefailure": true,
|
|
"string": "PO---- ",
|
|
"updated_online": true,
|
|
"value": 3
|
|
},
|
|
"id": 5,
|
|
"name": "Reallocated_Sector_Ct",
|
|
"raw": {
|
|
"string": "0",
|
|
"value": 0
|
|
},
|
|
"thresh": 36,
|
|
"value": 100,
|
|
"when_failed": "",
|
|
"worst": 100
|
|
},
|
|
{
|
|
"flags": {
|
|
"auto_keep": false,
|
|
"error_rate": false,
|
|
"event_count": false,
|
|
"performance": false,
|
|
"prefailure": true,
|
|
"string": "PO---- ",
|
|
"updated_online": true,
|
|
"value": 3
|
|
},
|
|
"id": 9,
|
|
"name": "Power_On_Hours",
|
|
"raw": {
|
|
"string": "1",
|
|
"value": 1
|
|
},
|
|
"thresh": 0,
|
|
"value": 100,
|
|
"when_failed": "",
|
|
"worst": 100
|
|
},
|
|
{
|
|
"flags": {
|
|
"auto_keep": false,
|
|
"error_rate": false,
|
|
"event_count": false,
|
|
"performance": false,
|
|
"prefailure": true,
|
|
"string": "PO---- ",
|
|
"updated_online": true,
|
|
"value": 3
|
|
},
|
|
"id": 12,
|
|
"name": "Power_Cycle_Count",
|
|
"raw": {
|
|
"string": "0",
|
|
"value": 0
|
|
},
|
|
"thresh": 0,
|
|
"value": 100,
|
|
"when_failed": "",
|
|
"worst": 100
|
|
},
|
|
{
|
|
"flags": {
|
|
"auto_keep": false,
|
|
"error_rate": false,
|
|
"event_count": false,
|
|
"performance": false,
|
|
"prefailure": true,
|
|
"string": "PO---- ",
|
|
"updated_online": true,
|
|
"value": 3
|
|
},
|
|
"id": 190,
|
|
"name": "Airflow_Temperature_Cel",
|
|
"raw": {
|
|
"string": "31 (Min/Max 31/31)",
|
|
"value": 522125343
|
|
},
|
|
"thresh": 50,
|
|
"value": 69,
|
|
"when_failed": "",
|
|
"worst": 69
|
|
}
|
|
]
|
|
},
|
|
"ata_smart_data": {
|
|
"capabilities": {
|
|
"attribute_autosave_enabled": true,
|
|
"conveyance_self_test_supported": false,
|
|
"error_logging_supported": true,
|
|
"exec_offline_immediate_supported": true,
|
|
"gp_logging_supported": false,
|
|
"offline_is_aborted_upon_new_cmd": false,
|
|
"offline_surface_scan_supported": true,
|
|
"selective_self_test_supported": false,
|
|
"self_tests_supported": true,
|
|
"values": [
|
|
25,
|
|
3
|
|
]
|
|
},
|
|
"offline_data_collection": {
|
|
"completion_seconds": 288,
|
|
"status": {
|
|
"passed": true,
|
|
"string": "was completed without error",
|
|
"value": 130
|
|
}
|
|
},
|
|
"self_test": {
|
|
"polling_minutes": {
|
|
"extended": 54,
|
|
"short": 2
|
|
},
|
|
"status": {
|
|
"passed": true,
|
|
"string": "completed without error",
|
|
"value": 0
|
|
}
|
|
}
|
|
},
|
|
"ata_smart_error_log": {
|
|
"summary": {
|
|
"count": 0,
|
|
"revision": 1
|
|
}
|
|
},
|
|
"ata_smart_self_test_log": {
|
|
"standard": {
|
|
"count": 0,
|
|
"revision": 1
|
|
}
|
|
},
|
|
"ata_version": {
|
|
"major_value": 240,
|
|
"minor_value": 22,
|
|
"string": "ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000"
|
|
},
|
|
"device": {
|
|
"info_name": "/dev/sda [SAT]",
|
|
"name": "/dev/sda",
|
|
"protocol": "ATA",
|
|
"type": "sat"
|
|
},
|
|
"firmware_version": "2.5+",
|
|
"in_smartctl_database": false,
|
|
"json_format_version": [
|
|
1,
|
|
0
|
|
],
|
|
"local_time": {
|
|
"asctime": "Fri Apr 1 06:28:54 2022 EDT",
|
|
"time_t": 1648808934
|
|
},
|
|
"logical_block_size": 512,
|
|
"model_name": "QEMU HARDDISK",
|
|
"physical_block_size": 512,
|
|
"power_cycle_count": 0,
|
|
"power_on_time": {
|
|
"hours": 1
|
|
},
|
|
"serial_number": "QM00001",
|
|
"smart_status": {
|
|
"passed": true
|
|
},
|
|
"smartctl": {
|
|
"argv": [
|
|
"smartctl",
|
|
"-x",
|
|
"--json=cosviu",
|
|
"/dev/sda"
|
|
],
|
|
"build_info": "(local build)",
|
|
"exit_status": 4,
|
|
"output": [
|
|
"smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-13-amd64] (local build)",
|
|
"Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org",
|
|
"",
|
|
"=== START OF INFORMATION SECTION ===",
|
|
"Device Model: QEMU HARDDISK",
|
|
"Serial Number: QM00001",
|
|
"Firmware Version: 2.5+",
|
|
"User Capacity: 42,949,673,472 bytes [42.9 GB]",
|
|
"Sector Size: 512 bytes logical/physical",
|
|
"TRIM Command: Available, deterministic",
|
|
"Device is: Not in smartctl database [for details use: -P showall]",
|
|
"ATA Version is: ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000",
|
|
"Local Time is: Fri Apr 1 06:28:54 2022 EDT",
|
|
"SMART support is: Available - device has SMART capability.",
|
|
"SMART support is: Enabled",
|
|
"AAM feature is: Unavailable",
|
|
"APM feature is: Unavailable",
|
|
"Rd look-ahead is: Unavailable",
|
|
"Write cache is: Enabled",
|
|
"DSN feature is: Unavailable",
|
|
"ATA Security is: Unavailable",
|
|
"Wt Cache Reorder: Unavailable",
|
|
"",
|
|
"=== START OF READ SMART DATA SECTION ===",
|
|
"SMART overall-health self-assessment test result: PASSED",
|
|
"",
|
|
"General SMART Values:",
|
|
"Offline data collection status: (0x82)\tOffline data collection activity",
|
|
"\t\t\t\t\twas completed without error.",
|
|
"\t\t\t\t\tAuto Offline Data Collection: Enabled.",
|
|
"Self-test execution status: ( 0)\tThe previous self-test routine completed",
|
|
"\t\t\t\t\twithout error or no self-test has ever ",
|
|
"\t\t\t\t\tbeen run.",
|
|
"Total time to complete Offline ",
|
|
"data collection: \t\t( 288) seconds.",
|
|
"Offline data collection",
|
|
"capabilities: \t\t\t (0x19) SMART execute Offline immediate.",
|
|
"\t\t\t\t\tNo Auto Offline data collection support.",
|
|
"\t\t\t\t\tSuspend Offline collection upon new",
|
|
"\t\t\t\t\tcommand.",
|
|
"\t\t\t\t\tOffline surface scan supported.",
|
|
"\t\t\t\t\tSelf-test supported.",
|
|
"\t\t\t\t\tNo Conveyance Self-test supported.",
|
|
"\t\t\t\t\tNo Selective Self-test supported.",
|
|
"SMART capabilities: (0x0003)\tSaves SMART data before entering",
|
|
"\t\t\t\t\tpower-saving mode.",
|
|
"\t\t\t\t\tSupports SMART auto save timer.",
|
|
"Error logging capability: (0x01)\tError logging supported.",
|
|
"\t\t\t\t\tNo General Purpose Logging support.",
|
|
"Short self-test routine ",
|
|
"recommended polling time: \t ( 2) minutes.",
|
|
"Extended self-test routine",
|
|
"recommended polling time: \t ( 54) minutes.",
|
|
"",
|
|
"SMART Attributes Data Structure revision number: 1",
|
|
"Vendor Specific SMART Attributes with Thresholds:",
|
|
"ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE",
|
|
" 1 Raw_Read_Error_Rate PO---- 100 100 006 - 0",
|
|
" 3 Spin_Up_Time PO---- 100 100 000 - 16",
|
|
" 4 Start_Stop_Count -O---- 100 100 020 - 100",
|
|
" 5 Reallocated_Sector_Ct PO---- 100 100 036 - 0",
|
|
" 9 Power_On_Hours PO---- 100 100 000 - 1",
|
|
" 12 Power_Cycle_Count PO---- 100 100 000 - 0",
|
|
"190 Airflow_Temperature_Cel PO---- 069 069 050 - 31 (Min/Max 31/31)",
|
|
" ||||||_ K auto-keep",
|
|
" |||||__ C event count",
|
|
" ||||___ R error rate",
|
|
" |||____ S speed/performance",
|
|
" ||_____ O updated online",
|
|
" |______ P prefailure warning",
|
|
"",
|
|
"Read SMART Log Directory failed: scsi error badly formed scsi parameters",
|
|
"",
|
|
"General Purpose Log Directory not supported",
|
|
"",
|
|
"SMART Extended Comprehensive Error Log (GP Log 0x03) not supported",
|
|
"",
|
|
"SMART Error Log Version: 1",
|
|
"No Errors Logged",
|
|
"",
|
|
"SMART Extended Self-test Log (GP Log 0x07) not supported",
|
|
"",
|
|
"SMART Self-test log structure revision number 1",
|
|
"No self-tests have been logged. [To run self-tests, use: smartctl -t]",
|
|
"",
|
|
"Selective Self-tests/Logging not supported",
|
|
"",
|
|
"SCT Commands not supported",
|
|
"",
|
|
"Device Statistics (GP/SMART Log 0x04) not supported",
|
|
"",
|
|
"Pending Defects log (GP Log 0x0c) not supported",
|
|
"",
|
|
"SATA Phy Event Counters (GP Log 0x11) not supported",
|
|
""
|
|
],
|
|
"platform_info": "x86_64-linux-5.10.0-13-amd64",
|
|
"svn_revision": "5155",
|
|
"version": [
|
|
7,
|
|
2
|
|
]
|
|
},
|
|
"smartctl_0001_i": "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-13-amd64] (local build)",
|
|
"smartctl_0002_i": "Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org",
|
|
"smartctl_0004_u": "=== START OF INFORMATION SECTION ===",
|
|
"smartctl_0005_i": "Device Model: QEMU HARDDISK",
|
|
"smartctl_0006_i": "Serial Number: QM00001",
|
|
"smartctl_0007_i": "Firmware Version: 2.5+",
|
|
"smartctl_0008_i": "User Capacity: 42,949,673,472 bytes [42.9 GB]",
|
|
"smartctl_0009_i": "Sector Size: 512 bytes logical/physical",
|
|
"smartctl_0010_i": "TRIM Command: Available, deterministic",
|
|
"smartctl_0011_i": "Device is: Not in smartctl database [for details use: -P showall]",
|
|
"smartctl_0012_i": "ATA Version is: ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000",
|
|
"smartctl_0013_i": "Local Time is: Fri Apr 1 06:28:54 2022 EDT",
|
|
"smartctl_0014_u": "SMART support is: Available - device has SMART capability.",
|
|
"smartctl_0015_u": "SMART support is: Enabled",
|
|
"smartctl_0016_u": "AAM feature is: Unavailable",
|
|
"smartctl_0017_u": "APM feature is: Unavailable",
|
|
"smartctl_0018_u": "Rd look-ahead is: Unavailable",
|
|
"smartctl_0019_i": "Write cache is: Enabled",
|
|
"smartctl_0020_u": "DSN feature is: Unavailable",
|
|
"smartctl_0021_u": "ATA Security is: Unavailable",
|
|
"smartctl_0022_u": "Wt Cache Reorder: Unavailable",
|
|
"smartctl_0024_u": "=== START OF READ SMART DATA SECTION ===",
|
|
"smartctl_0025_i": "SMART overall-health self-assessment test result: PASSED",
|
|
"smartctl_0027_i": "General SMART Values:",
|
|
"smartctl_0028_i": "Offline data collection status: (0x82)\tOffline data collection activity",
|
|
"smartctl_0029_i": "\t\t\t\t\twas completed without error.",
|
|
"smartctl_0030_u": "\t\t\t\t\tAuto Offline Data Collection: Enabled.",
|
|
"smartctl_0031_i": "Self-test execution status: ( 0)\tThe previous self-test routine completed",
|
|
"smartctl_0032_i": "\t\t\t\t\twithout error or no self-test has ever ",
|
|
"smartctl_0033_i": "\t\t\t\t\tbeen run.",
|
|
"smartctl_0034_i": "Total time to complete Offline ",
|
|
"smartctl_0035_i": "data collection: \t\t( 288) seconds.",
|
|
"smartctl_0036_i": "Offline data collection",
|
|
"smartctl_0037_i": "capabilities: \t\t\t (0x19) SMART execute Offline immediate.",
|
|
"smartctl_0038_u": "\t\t\t\t\tNo Auto Offline data collection support.",
|
|
"smartctl_0039_i": "\t\t\t\t\tSuspend Offline collection upon new",
|
|
"smartctl_0040_i": "\t\t\t\t\tcommand.",
|
|
"smartctl_0041_i": "\t\t\t\t\tOffline surface scan supported.",
|
|
"smartctl_0042_i": "\t\t\t\t\tSelf-test supported.",
|
|
"smartctl_0043_i": "\t\t\t\t\tNo Conveyance Self-test supported.",
|
|
"smartctl_0044_i": "\t\t\t\t\tNo Selective Self-test supported.",
|
|
"smartctl_0045_i": "SMART capabilities: (0x0003)\tSaves SMART data before entering",
|
|
"smartctl_0046_i": "\t\t\t\t\tpower-saving mode.",
|
|
"smartctl_0047_u": "\t\t\t\t\tSupports SMART auto save timer.",
|
|
"smartctl_0048_i": "Error logging capability: (0x01)\tError logging supported.",
|
|
"smartctl_0049_i": "\t\t\t\t\tNo General Purpose Logging support.",
|
|
"smartctl_0050_i": "Short self-test routine ",
|
|
"smartctl_0051_i": "recommended polling time: \t ( 2) minutes.",
|
|
"smartctl_0052_i": "Extended self-test routine",
|
|
"smartctl_0053_i": "recommended polling time: \t ( 54) minutes.",
|
|
"smartctl_0055_i": "SMART Attributes Data Structure revision number: 1",
|
|
"smartctl_0056_i": "Vendor Specific SMART Attributes with Thresholds:",
|
|
"smartctl_0057_i": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE",
|
|
"smartctl_0058_i": " 1 Raw_Read_Error_Rate PO---- 100 100 006 - 0",
|
|
"smartctl_0059_i": " 3 Spin_Up_Time PO---- 100 100 000 - 16",
|
|
"smartctl_0060_i": " 4 Start_Stop_Count -O---- 100 100 020 - 100",
|
|
"smartctl_0061_i": " 5 Reallocated_Sector_Ct PO---- 100 100 036 - 0",
|
|
"smartctl_0062_i": " 9 Power_On_Hours PO---- 100 100 000 - 1",
|
|
"smartctl_0063_i": " 12 Power_Cycle_Count PO---- 100 100 000 - 0",
|
|
"smartctl_0064_i": "190 Airflow_Temperature_Cel PO---- 069 069 050 - 31 (Min/Max 31/31)",
|
|
"smartctl_0065_i": " ||||||_ K auto-keep",
|
|
"smartctl_0066_i": " |||||__ C event count",
|
|
"smartctl_0067_i": " ||||___ R error rate",
|
|
"smartctl_0068_i": " |||____ S speed/performance",
|
|
"smartctl_0069_i": " ||_____ O updated online",
|
|
"smartctl_0070_i": " |______ P prefailure warning",
|
|
"smartctl_0072_u": "Read SMART Log Directory failed: scsi error badly formed scsi parameters",
|
|
"smartctl_0074_u": "General Purpose Log Directory not supported",
|
|
"smartctl_0076_u": "SMART Extended Comprehensive Error Log (GP Log 0x03) not supported",
|
|
"smartctl_0078_i": "SMART Error Log Version: 1",
|
|
"smartctl_0079_i": "No Errors Logged",
|
|
"smartctl_0081_u": "SMART Extended Self-test Log (GP Log 0x07) not supported",
|
|
"smartctl_0083_i": "SMART Self-test log structure revision number 1",
|
|
"smartctl_0084_i": "No self-tests have been logged. [To run self-tests, use: smartctl -t]",
|
|
"smartctl_0086_u": "Selective Self-tests/Logging not supported",
|
|
"smartctl_0088_u": "SCT Commands not supported",
|
|
"smartctl_0090_u": "Device Statistics (GP/SMART Log 0x04) not supported",
|
|
"smartctl_0092_u": "Pending Defects log (GP Log 0x0c) not supported",
|
|
"smartctl_0094_u": "SATA Phy Event Counters (GP Log 0x11) not supported",
|
|
"temperature": {
|
|
"current": 31
|
|
},
|
|
"trim": {
|
|
"deterministic": true,
|
|
"supported": true,
|
|
"zeroed": false
|
|
},
|
|
"user_capacity": {
|
|
"blocks": 83886081,
|
|
"blocks_s": "83886081",
|
|
"bytes": 42949673472,
|
|
"bytes_s": "42949673472"
|
|
},
|
|
"write_cache": {
|
|
"enabled": true
|
|
}
|
|
}
|
|
]
|
|
}
|
|
}
|